Pravidla původu – nápověda

TITLE I

GENERAL PROVISIONS

Article 1

Definitions

For the purposes of this Annex ( 59 ):

(a)

"chapters", "headings" and "subheadings" mean the chapters, the headings (four-digit codes) and the subheadings (six-digit codes) used in the nomenclature which makes up the Harmonized System (HS);

(b)

"classified" refers to the classification of a product or material under a particular heading;

(c)

"competent public authority" refers to: customs authorities of the Member States of the European Union;

For Costa Rica, the Promotora del Comercio Exterior de Costa Rica (PROCOMER), or its successor;

For El Salvador, the Centro de Trámites de Exportación del Banco Central de Reserva (CENTREX/BCR) for issuance of movement certificates EUR.1, verification of proofs of origin for exports and to grant the status of approved exporter; and Dirección General de Aduanas (DGA) del Ministerio de Hacienda for verification of proofs of origin for imports, or their successors;

For Guatemala, the Dirección de Administración del Comercio Exterior del Ministerio de Economía for issuance of movement certificates EUR.1, to grant the status of approved exporter and for verification of proofs of origin, or its successor;

For Honduras, the Dirección General de Integración Económica y Política Comercial de la Secretaría de Estado en los Despachos de Industria y Comercio for issuance of movement certificates EUR.1, to grant the status of approved exporter and for verification of proofs of origin, or its successor;

For Nicaragua, the Centro de Trámites de las Exportaciones (CETREX) del Ministerio de Fomento, Industria y Comercio (MIFIC) for issuance of movement certificates EUR.1, verification of proofs of origin for exports and to grant the status of approved exporter; and the Dirección General de Servicios Aduaneros (DGA) for verification of proofs of origin for imports or their successors; and

For Panama, the Ministerio de Comercio e Industrias for issuance of movement certificates EUR.1; and the Autoridad Nacional de Aduanas for verification of proofs of origin and to grant the status of approved exporter, or their successors;

(d)

"consignment" means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(e)

"customs value" means the value as determined in accordance with the WTO Agreement on Implementation of Article VII of the General Agreement on Tariffs and Trade 1994 (hereinafter referred to as "Customs Valuation Agreement");

(f)

"ex-works price" means the price paid for the product ex works to the manufacturer in the Party in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g)

"goods" means both materials and products;

(h)

"manufacture" means any kind of working or processing, including assembly or specific operations;

(i)

"material" means any ingredient, raw material, component or part, amongst others, used in the manufacture of the product;

(j)

"product" means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(k)

"value of materials" means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the Party;

(l)

"value of originating materials" means the value of such materials as defined in (k), applied mutatis mutandis.

TITLE II

DEFINITION OF THE CONCEPT OF "ORIGINATING PRODUCTS"

Article 2

General requirements

For the purpose of implementing Title II (Trade in Goods) of Part IV of this Agreement, the following products shall be considered as originating in the European Union:

(a)

products wholly obtained in the European Union within the meaning of Article 4;

(b)

products obtained in the European Union incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the European Union within the meaning of Article 5.

For the purpose of implementing Title II (Trade in Goods) of Part IV of this Agreement, the following products shall be considered as originating in Central America:

(a)

products wholly obtained in Central America within the meaning of Article 4;

(b)

products obtained in Central America incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Central America within the meaning of Article 5.

Article 3

Cumulation of origin

Materials originating in the European Union shall be considered as materials originating in Central America when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 6.

Materials originating in Central America shall be considered as materials originating in the European Union when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 6.

Notwithstanding paragraphs 1 and 2, materials originating in Bolivia, Colombia, Ecuador, Peru or Venezuela shall be considered as materials originating in Central America when further processed or incorporated into a product obtained there ( 60 ).

In order for the products referred to in paragraph 3 to acquire originating status, it shall not be necessary that the materials have undergone sufficient working or processing, provided that:

(a)

the working or processing of the materials carried out in Central America went beyond the operations referred to in Article 6;

(b)

the materials were originating in one of the countries listed in paragraph 3, in application of rules of origin identical to those applicable if said materials were exported directly to the European Union; and

(c)

the existing arrangements in force between Central America and the other countries referred to in paragraph 3 allow for adequate administrative cooperation procedures ensuring full implementation of this paragraph, as well as of certification and of verification of the originating status of the products ( 61 ).

The originating status of materials exported from one of the countries referred to in paragraph 3 to Central America to be used in further working or processing shall be established by a proof of origin under which these materials could be exported directly to the European Union.

Proof of the originating status, acquired under the terms of paragraph 4, of goods exported to the European Union shall be established by a movement certificate EUR.1 issued or an invoice declaration made out in the exporting country in accordance with the provisions of Title IV (Proof of Origin) of this Annex. These documents shall bear the mention "cumulation with (name of country)".

At the request of a Republic of the CA Party or the European Union, materials originating in Mexico, South American or Caribbean countries shall be considered as materials originating respectively in Central America or in the European Union when further processed or incorporated into a product obtained there.

The request shall be submitted to the Sub-Committee on Customs, Trade Facilitation and Rules of Origin established under Article 123 of Chapter 3 (Customs and Trade Facilitation) of Title II of Part IV of this Agreement.

In order for the products referred to in paragraph 7 to acquire originating status, it shall not be necessary that the materials have undergone sufficient working or processing, provided that:

(a)

the working or processing of the materials carried out in Central America or in the European Union went beyond the operations referred to in Article 6;

(b)

the materials were originating in Mexico, South American or Caribbean country, in application of rules of origin identical to those applicable if said materials were exported directly to the European Union;

(c)

(d)

the Republics of the CA Party, the European Union and the other country or countries concerned have an arrangement on adequate administrative cooperation procedures which will ensure full implementation of this paragraph as well as of certification and of verification of the originating status of the products.

10.

The Parties, on a common accord, shall notify to the Sub-Committee on Customs, Trade Facilitation and Rules of Origin the materials to which the provisions of paragraphs 7 to 12 shall apply.

11.

The cumulation established in paragraphs 7, 8, 9, 10 and 12 of this Article may be applied provided that:

(a)

preferential trade agreements in accordance with Article XXIV GATT 1994 between the non-party concerned and the Republics of the CA Party and the European Union respectively, are in force. This cumulation shall only be applied between the Parties for which those agreements are in force;

(b)

cumulation provisions equivalent to the ones provided under paragraphs 7, 8, 9, 10 and 12 of this Article are contained in the Agreements referred to under (a), in order for the cumulation provisions to apply in a reciprocal manner between the Republics of the CA Party, the European Union and the non-Party concerned, respectively; and

(c)

notices indicating the fulfilment of the necessary requirements to apply cumulation under paragraphs 7, 8, 9, 10 and 12 of this Article have been published in the Official Journal of the European Union (C series), in the official publications of the Republics of the CA Party and of the non-Party countries concerned according to their own procedures.

12.

The Parties may establish additional conditions for the application of paragraphs 7 to 11.

Article 4

Wholly obtained products

The following shall be considered as wholly obtained in the European Union or in Central America:

(a)

mineral products extracted from their soil or from their seabed;

(b)

vegetable products harvested or grown and gathered there;

(c)

live animals born and raised there;

(d)

products from live animals raised there;

(e)

(i)

products obtained by hunting conducted there;

(ii)

products obtained by fishing conducted in their inland waters or within twelve nautical miles measured from the baselines of the European Union or of the Republics of the CA Party;

(iii)

products of aquaculture, including mariculture where the fish, crustaceans, molluscs and others aquatic invertebrates are born or raised there;

(f)

products of sea fishing and other products taken from the sea outside twelve nautical miles measured from the baselines of the European Union or of the Republics of the CA Party by their vessels;

(g)

products made aboard their factory ships exclusively from products referred to in (f);

(h)

used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste;

(i)

waste and scrap resulting from manufacturing operations conducted there;

(j)

products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(k)

goods produced there exclusively from the products specified in (a) to (j).

The terms "their vessels" and "their factory ships" in paragraph 1(f) and (g) shall apply only to vessels and factory ships which:

(a)

are registered in a Member State of the European Union or in a Republic of the CA Party in accordance with the domestic legislation of each Party;

(b)

sail under the flag of a Member State of the European Union or of a Republic of the CA Party; and

(c)

meet one of the following conditions:

(i)

they are at least 50 per cent owned by nationals of the Member States of the European Union or of the Republics of the CA Party; or

(ii)

they are owned by companies

—

which have their head office and their main place of business in a Member State of the European Union or in a Republic of the CA Party, and

—

which are at least 50 per cent owned by a Member State of the European Union or a Republic of the CA Party, public entities or nationals thereof.

The conditions of paragraph 2 can be fulfilled in the different countries mentioned in Article 3 under conditions referred to in this Article.

Article 5

Sufficiently worked or processed products

For the purposes of Article 2, products which are not wholly obtained are considered to be sufficiently worked or processed when the conditions set out in the list in Appendix 2 are fulfilled.

The conditions referred to above indicate, for all products covered by the Agreement, the working or processing which shall be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. It follows that if a product which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in the list, shall not be used in the manufacture of a product may nevertheless be used, provided that:

(a)

their total value does not exceed 10 per cent of the ex-works price of the product;

(b)

any of the percentages given in the list for the maximum value of non-originating materials are not exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonized System for which Appendix 1 shall apply. Additionally, this paragraph shall not apply to products wholly obtained in the Parties. However, without prejudice to Article 7, the tolerance provided for in this paragraph applies also to the materials which are used in the manufacture of a product and for which the rule laid down in the list in Appendix 2 for that product requires that such materials be wholly obtained.

Paragraphs 1 and 2 shall apply subject to the provisions of Article 6.

Article 6

Insufficient working or processing

Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 5 are satisfied:

(a)

preserving operations to ensure that the products remain in good condition during transport and storage;

(b)

breaking-up and assembly of packages;

(c)

washing, cleaning; removal of dust, oxide, oil, paint or other coverings;

(d)

ironing or pressing of textiles;

(e)

simple painting and polishing operations;

(f)

husking, partial or total bleaching, polishing, and glazing of cereals and rice;

(g)

operations to colour or flavour sugar or form sugar lumps; partial or total milling of crystal sugar;

(h)

peeling, stoning and shelling, of fruits, nuts and vegetables;

(i)

sharpening, simple grinding or simple cutting;

(j)

sifting, screening, sorting, classifying, grading, matching (including the making-up of sets of articles);

(k)

simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;

(l)

affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;

(m)

simple mixing of products, whether or not of different kinds; mixing of sugar with any material;

(n)

simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;

(o)

slaughter of animals;

(p)

a combination of two or more operations specified in (a) to (o).

All operations carried out in the European Union or in Central America on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 7

Unit of Qualification

The unit of qualification for the application of the provisions of this Annex shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonized System.

It follows that:

(a)

when a product composed of a group or assembly of articles is classified under the terms of the Harmonized System in a single heading, the whole constitutes the unit of qualification;

(b)

when a consignment consists of a number of identical products classified under the same heading of the Harmonized System, each product must be taken individually when applying the provisions of this Annex.

Where, under General Rule 5 of the Harmonized System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 8

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 9

Sets

Sets, as defined in General Rule 3 of the Harmonized System, shall be regarded as originating when all component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 per cent of the ex-works price of the set.

Article 10

Neutral elements

In order to determine whether a product originates, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)

energy and fuel;

(b)

plant and equipment;

(c)

machines and tools;

(d)

goods which do not enter and which are not intended to enter into the final composition of the product.

TITLE III

TERRITORIAL REQUIREMENTS

Article 11

Principle of territoriality

The conditions set out in Title II of this Annex, relating to the acquisition of originating status must be fulfilled without interruption in the European Union or Central America.

If originating goods exported from the European Union or from Central America to another country return, they shall be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)

the returning goods are the same as those exported; and

(b)

they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

The acquisition of originating status in accordance with the conditions set out in Title II of this Annex shall not be affected by working or processing done outside the Parties on materials exported from the European Union or from Central America and subsequently re-imported there, provided that:

(a)

said materials are wholly obtained in the European Union or in Central America or have undergone working or processing beyond the operations referred to in Article 6 prior to being exported; and

(b)

it can be demonstrated to the satisfaction of the customs authorities that:

(i)

the re-imported goods have been obtained by working or processing the exported materials; and

(ii)

the total added value acquired outside the Parties by applying the provisions of this Article does not exceed 10 per cent of the ex-works price of the end product for which originating status is claimed.

For the purposes of paragraph 3, the conditions for acquiring originating status set out in Title II of this Annex shall not apply to working or processing done outside the Parties. But where, in the list in Appendix 2, a rule setting a maximum value for all the non-originating materials incorporated is applied in determining the originating status of the end product, the total value of the non-originating materials incorporated in the territory of the Party concerned, taken together with the total added value acquired outside the Parties by applying the provisions of this Article, shall not exceed the stated percentage.

For the purposes of applying the provisions of paragraphs 3 and 4, "total added value" shall mean all costs arising outside the Parties, including the value of the materials incorporated there.

The provisions of paragraphs 3 and 4 shall not apply to products which do not fulfil the conditions set out in the list in Appendix 2 or which can be considered sufficiently worked or processed only if the general tolerance fixed in Article 5, paragraph 2 is applied.

The provisions of paragraphs 3 and 4 shall not apply to products of Chapters 50 to 63 of the Harmonized System.

Any working or processing of the kind covered by the provisions of this Article and done outside the Parties shall be done under the outward processing arrangements, or similar arrangements.

Article 12

Direct transport

The preferential tariff treatment provided for under this Agreement applies only to products, satisfying the requirements of this Annex, which are transported directly between the Parties. However, products may be transported through other territories with, should the occasion arise, trans-shipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition.

Originating products may be transported by pipeline across territories other than those of the Parties.

Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing Party by the production of:

(a)

a single transport document covering the passage from the exporting Party through the country of transit; or

(b)

certification issued by the customs authorities of the country of transit containing the following:

(i)

an exact description of the products,

(ii)

the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used, and

(iii)

the conditions under which the products remained in the transit country; or

(c)

failing these, any substantiating documents to the satisfaction of the customs authority of the importing Party.

Article 13

Exhibitions

Originating products, sent for exhibition in a country other than the Parties and sold after the exhibition for importation into the territory of a Party shall benefit on importation from the provisions of this Agreement provided it is shown to the satisfaction of the customs authorities that:

(a)

an exporter has consigned these products from the European Union or from a Republic of the CA Party to the country in which the exhibition is held and has exhibited them there;

(b)

the products have been sold or otherwise disposed of by that exporter to a person in the territory of a Party;

(c)

the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and

(d)

the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

A proof of origin must be issued or made out in accordance with the provisions of Title IV of this Annex and submitted to the customs authorities of the importing Party in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required.

Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.

TITLE IV

PROOF OF ORIGIN

Article 14

General requirements

Products originating in the European Union shall, on importation into Central America, and products originating in Central America shall, on importation into the European Union, benefit from this Agreement upon submission of either:

(a)

a movement certificate EUR.1, a specimen of which appears in Appendix 3; or

(b)

in the cases specified in Article 19, paragraph 1, a declaration, subsequently referred to as the "invoice declaration", given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified; the text of the invoice declaration appears in Appendix 4.

Notwithstanding paragraph 1, originating products within the meaning of this Annex shall, in the cases specified in Article 24, benefit from the Agreement without it being necessary to submit any of the documents referred to above.

Article 15

Procedure for the issue of a movement certificate EUR.1

A movement certificate EUR.1 shall be issued by the competent public authority of the exporting Party on application having been made in writing by the exporter or, under the exporter's responsibility, by his authorised representative.

For this purpose, the exporter or his authorised representative shall fill out both the movement certificate EUR.1 and the application form, specimens of which appear in Appendix 3. These forms shall be completed in one of the languages in which this Agreement is drawn up and in accordance with the provisions of the domestic legislation of the exporting Party. If they are hand-written, they shall be completed in ink in printed characters. The description of the products must be given in the box reserved for this purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line must be drawn below the last line of the description, the empty space being crossed through.

The exporter applying for the issue of a movement certificate EUR.1 shall be prepared to submit at any time, at the request of the competent public authority of the exporting Party where the movement certificate EUR.1 is issued, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Annex.

A movement certificate EUR.1 shall be issued by the competent public authority of a Member State of the European Union or of a Republic of the CA Party if the products concerned can be considered as products originating in the European Union or in Central America and fulfil the other requirements of this Annex.

The competent public authorities issuing movement certificates EUR.1 shall take any steps necessary to verify the originating status of the products and the fulfilment of the other requirements of this Annex. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounting records ( 62 ) or any other check considered appropriate. They shall also ensure that the forms referred to in paragraph 2 are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions.

The date of issue of the movement certificate EUR.1 shall be indicated in box 11 of the certificate.

A movement certificate EUR.1 shall be issued by the competent public authorities and made available to the exporter as soon as actual exportation has been effected or ensured.

Article 16

Movement certificates EUR.1 issued retrospectively

Notwithstanding Article 15, paragraph 7, a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if:

(a)

it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or

(b)

it is demonstrated to the satisfaction of the competent public authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons.

For the implementation of paragraph 1, the exporter must indicate in his application the place and date of exportation of the products to which the movement certificate EUR.1 relates, and state the reasons for his request.

The competent public authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application agrees with that in the corresponding file.

▼M3

Movement certificates EUR. 1 issued retrospectively must be endorsed with the phrase ‘issued retrospectively’ in one of the following languages:

BG	"ИЗДАДЕН ВПОСЛЕДСТВИЕ"

ES	"EXPEDIDO A POSTERIORI"

CS	"VYSTAVENO DODATEČNE"

DA	"UDSTEDT EFTERFØLGENDE"

DE	"NACHTRÄGLICH AUSGESTELLT"

ET	"TAGANTJÄRELE VÄLJA ANTUD"

EL	"ΕΚΔΟΘΕΝ ΕΚ ΤΩΝ ΥΣΤΕΡΩΝ"

EN	"ISSUED RETROSPECTIVELY"

FR	"DÉLIVRÉ A POSTERIORI"

HR	"NAKNADNO IZDANO"

IT	"RILASCIATO A POSTERIORI"

LV	"IZSNIEGTS RETROSPEKTIVI"

LT	"RETROSPEKTYVUSIS IŠDAVIMAS"

HU	"KIADVA VISSZAMENOLEGES HATÁLLYAL"

MT	"MAHRUG RETROSPETTIVAMENT"

NL	"AFGEGEVEN A POSTERIORI"

PL	"WYSTAWIONE RETROSPEKTYWNIE"

PT	"EMITIDO A POSTERIORI"

RO	"EMIS A POSTERIORI"

SK	"VYDANÉ DODATOCNE"

SL	"IZDANO NAKNADNO"

FI	"ANNETTU JÄLKIKÄTEEN"

SV	"UTFÄRDAT I EFTERHAND"

▼B

The endorsement referred to in paragraph 4 shall be inserted in the "Remarks" box of the movement certificate EUR.1.

Article 17

Issue of a duplicate movement certificate EUR.1

In the event of theft, loss or destruction of a movement certificate EUR.1, the exporter may apply to the competent public authorities which issued it for a duplicate made out on the basis of the export documents in their possession.

▼M3

The duplicate issued in this way must be endorsed with the phrase ‘duplicate’ in one of the following languages:

BG	"ДУБЛИКАТ"

ES	"DUPLICADO"

CS	"DUPLIKÁT"

DA	"DUPLIKAT"

DE	"DUPLIKAT"

ET	"DUPLIKAAT"

EL	"ΑΝΤΙΓΡΑΦΟ"

EN	"DUPLICATE"

FR	"DUPLICATA"

HR	"DUPLIKAT"

IT	"DUPLICATO"

LV	"DUBLIKATS"

LT	"DUBLIKATAS"

HU	"MÁSODLAT"

MT	"DUPLIKAT"

NL	"DUPLICAAT"

PL	"DUPLIKAT"

PT	"SEGUNDA VIA"

RO	"DUPLICAT"

SK	"DUPLIKÁT"

"DVOJNIK"

FI	"KAKSOISKAPPALE"

SV	"DUPLIKAT"

▼B

The endorsement referred to in paragraph 2 shall be inserted in the "Remarks" box of the duplicate movement certificate EUR.1.

The duplicate, which must bear the date of issue of the original movement certificate EUR.1, shall take effect as from that date.

Article 18

Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

When originating products are placed under the control of a customs office in a Party, it shall be possible to replace the original proof of origin by one or more movement certificates EUR.1 for the purpose of sending all or some of these products elsewhere within the European Union or Central America. The replacement movement certificate(s) EUR.1 shall be issued by the customs office in the EU Party under whose control the products are placed or by the respective competent public authority of the Republics of the CA Party.

Article 19

Conditions for making out an invoice declaration

An invoice declaration as referred to in Article 14, paragraph 1(b) may be made out:

(a)

by an approved exporter within the meaning of Article 20; or

(b)

by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed the amount in Euros established in Appendix 6 (Amounts referred to in Articles 19, paragraph 1(b) and 24, paragraph 3 of Annex II, concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Cooperation).

An invoice declaration may be made out if the products concerned can be considered as products originating in the European Union or in Central America and fulfil the other requirements of this Annex.

The exporter making out an invoice declaration shall be prepared to submit at any time, at the request of the competent public authorities of the exporting Party, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Annex.

An invoice declaration shall be made out by the exporter by typing, stamping or printing on the invoice, the delivery note or another commercial document, the text of the declaration included in Appendix 4, by using one of the linguistic versions set out in that Appendix and in accordance with the provisions of the domestic legislation of the exporting Party. If the declaration is hand-written, it shall be written in ink in printed characters.

Invoice declarations shall bear the original signature of the exporter in manuscript. However, an approved exporter within the meaning of Article 20 shall not be required to sign such declarations provided that he gives the competent public authorities of the exporting Party a written undertaking that he accepts full responsibility for any invoice declaration which identifies him as if it had been signed in manuscript by him.

An invoice declaration may be made out by the exporter when the products to which it relates are exported, or after exportation on condition that it is presented in the importing Party no longer than the period established in Appendix 5.

Article 20

Approved exporter

The competent public authorities of the exporting Party may authorise any exporter, hereinafter referred to as "approved exporter", who makes frequent shipments of products under this Agreement to make out invoice declarations irrespective of the value of the products concerned. An exporter seeking such authorisation must offer to the satisfaction of the competent public authorities all guarantees necessary to verify the originating status of the products as well as the fulfilment of the other requirements of this Annex.

The competent public authorities may grant the status of approved exporter subject to any conditions which they consider appropriate.

The competent public authorities shall grant to the approved exporter an authorisation number which shall appear on the invoice declaration.

The competent public authorities shall monitor the use of the authorisation by the approved exporter.

The competent public authorities may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, no longer fulfils the conditions referred to in paragraph 2 or otherwise makes an incorrect use of the authorisation.

Article 21

Validity of proof of origin

A proof of origin shall be valid for twelve months from the date of issue in the exporting Party, and shall be submitted within said period to the customs authorities of the importing Party.

Proofs of origin which are submitted to the customs authorities of the importing Party after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying preferential tariff treatment, where the failure to submit these documents by the final date set is due to exceptional circumstances.

In other cases of belated presentation, the customs authorities of the importing Party may accept the proofs of origin where the products have been submitted before said final date.

According to the domestic legislation of the importing Party, a preferential tariff treatment may be awarded, when it proceeds, through the reimbursement of the tariffs in a period no longer than the period established in Appendix 5 from the date of acceptance of the import declaration, where a proof of origin is presented indicating that the imported goods were at that date eligible for preferential tariff treatment.

Article 22

Submission of proof of origin

Proofs of origin shall be submitted to the customs authorities of the importing Party in accordance with the procedures applicable in that Party. Said authorities may require a translation of a proof of origin and may also require the import declaration to be accompanied by a statement from the importer to the effect that the products meet the conditions required for the implementation of this Agreement.

Article 23

Importation by instalments

Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing Party, dismantled or non-assembled products within the meaning of General Rule 2(a) of the Harmonized System falling within Sections XVI and XVII or headings 7308 and 9406 of the Harmonized System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities upon importation of the first instalment.

Article 24

Exemptions from proof of origin

Products sent as small packages from private persons to private persons or forming part of travellers' personal luggage shall be admitted as originating products without requiring the submission of a proof of origin, provided that such products are not imported by way of trade and have been declared as meeting the requirements of this Annex and where there is no doubt as to the veracity of such a declaration. In the case of products sent by post, this declaration can be made on the customs declaration CN22/CN23 or on a sheet of paper annexed to that document.

Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view.

Furthermore, the total value of these products shall not exceed in the case of small packages or of products forming part of travellers' personal luggage, the amounts in Euros established in Appendix 6 (Amounts referred to in Articles 19, paragraph 1(b) and 24, paragraph 3 of Annex II, concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Cooperation).

Article 25

Supporting documents

The documents referred to in Articles 15, paragraph 3 and 19, paragraph 3 used for the purpose of proving that products covered by a movement certificate EUR.1 or an invoice declaration can be considered as products originating in the European Union or in Central America and fulfil the other requirements of this Annex may consist inter alia of the following:

(a)

direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained for example in his accounting records or internal book-keeping;

(b)

documents proving the originating status of materials used, issued or made out in a Party, where these documents are used in accordance with domestic legislation;

(c)

documents proving the working or processing of materials in the European Union or in Central America, issued or made out in a Party, where these documents are used in accordance with domestic legislation;

(d)

movement certificates EUR.1 or invoice declarations proving the originating status of materials used, issued or made out in a Party in accordance with this Annex.

Article 26

Preservation of proof of origin and supporting documents

The exporter applying for the issuance of a movement certificate EUR.1 shall keep for at least three years the documents referred to in Article 15, paragraph 3.

The exporter making out an invoice declaration shall keep for at least three years a copy of this invoice declaration as well as the documents referred to in Article 19, paragraph 3.

The competent public authority of the exporting Party issuing a movement certificate EUR.1 shall keep for at least three years the application form referred to in Article 15, paragraph 2.

The customs authorities of the importing Party shall keep for at least three years the movement certificates EUR.1 and the invoice declarations submitted to them, which may be kept in electronic format.

Article 27

Discrepancies and formal errors

The discovery of slight discrepancies between the statements made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that this document does correspond to the products submitted.

Obvious formal errors such as typing errors on a proof of origin should not cause this document to be rejected if these errors are not such as to create doubts concerning the correctness of the statements made in this document.

Article 28

Amounts expressed in euro

For the application of the provisions of Article 19, paragraph 1(b) and Article 24, paragraph 3 in cases where products are invoiced in a currency other than euro, amounts in the national currencies of the Member States of the European Union or of the Republics of the CA Party equivalent to the amounts expressed in euro shall be fixed annually by each Member State of the European Union or Republic of the CA Party concerned.

A consignment shall benefit from the provisions of Article 19, paragraph 1(b) or Article 24, paragraph 3 by reference to the currency in which the invoice is drawn up, according to the amount fixed by the Member State of the European Union or Republic of the CA Party concerned.

The amounts to be used in any given national currency shall be the equivalent in that currency of the amounts expressed in euro as at the first working day of October. The amounts shall be communicated to the European Commission by October 15th, and shall apply from January 1st, the following year. The European Commission shall notify the Member States of the European Union and the Republics of the CA Party concerned of the relevant amounts.

The Member States of the European Union and the Republics of the CA Party may round up or down the amount resulting from the conversion into its national currency of an amount expressed in euro. The rounded-off amount may not differ from the amount resulting from the conversion by more than 5 per cent. A Member State of the European Union or a Republic of the CA Party may retain unchanged its national currency equivalent of an amount expressed in euro if, at the time of the annual adjustment provided for in paragraph 3, the conversion of that amount, prior to any rounding-off, results in an increase of less than 15 per cent in the national currency equivalent. The national currency equivalent may be retained unchanged if the conversion would result in a decrease in that equivalent value.

The amounts expressed in euro shall be reviewed by the Association Committee at the request of a Party. When carrying out this review, the Association Committee shall consider the desirability of preserving the effects of the limits concerned in real terms. For this purpose, it may decide to modify the amounts expressed in euro.

TITLE V

ARRANGEMENTS FOR ADMINISTRATIVE COOPERATION

Article 29

Administrative cooperation

The competent public authorities of the Parties shall provide each other, through the European Commission, with specimen impressions of stamps used in their offices for the issue of movement certificates EUR.1 and with the addresses of the competent public authorities responsible for verifying those certificates and invoice declarations.

In order to ensure the proper application of this Annex, the Parties shall assist each other, through their respective competent public authorities or, when applicable, customs authorities in checking the authenticity of the movement certificates EUR.1 or the invoice declarations and the correctness of the information given in these documents.

Article 30

Verification of proofs of origin

Subsequent verifications of proofs of origin shall be carried out at random or whenever the customs authority or, when applicable, competent public authority of the importing Party have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or the fulfilment of the other requirements of this Annex.

For the purposes of implementing the provisions of paragraph 1, the customs authority or, when applicable, competent public authority of the importing Party shall return the movement certificate EUR.1 and the invoice, if it has been submitted, the invoice declaration, or a copy of these documents, to the competent public authorities of the exporting Party giving, where appropriate, the reasons for the enquiry. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification.

The verification shall be carried out by the competent public authorities of the exporting Party. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounting records or any other check considered appropriate related to origin and according the procedures of its domestic legislation.

If the customs authorities of the importing Party decide to suspend the granting of preferential tariff treatment to the products from the exporter subject to verification, while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures judged necessary.

The competent public authorities or, when applicable, customs authorities requesting the verification shall be informed of the results of this verification as soon as possible. These results must indicate clearly whether the documents are authentic and whether the products concerned can be considered as products originating in the European Union or in Central America and fulfil the other requirements of this Annex.

If in cases of reasonable doubt there is no reply within ten months of the date of the verification request or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, the requesting customs authorities or, when applicable, competent public authority shall, except in exceptional circumstances, refuse entitlement to the preferences to the products covered by the proof of origin subject to verification.

Article 31

Dispute settlement

Where disputes arise in relation to the verification procedures of Article 30, which cannot be settled between the authorities requesting verification and the authorities responsible for carrying out this verification, or in relation to the interpretation of this Annex, the requests for the settlement of those disputes shall be submitted to the Sub-Committee on Customs, Trade Facilitation and Rules of Origin for consultations and discussions within the Sub-Committee. In any case, the Parties shall retain their rights under the dispute settlement mechanism established in Title X (Dispute Settlement) of Part IV of this Agreement.

In all cases the settlement of disputes between the importer and the customs authorities of the importing Party shall be under the domestic legislation of said Party.

Article 32

Penalties

Penalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains incorrect information for the purpose of obtaining a preferential tariff treatment for products.

Article 33

Free zones

The European Union and the Republics of the CA Party shall take all necessary steps to ensure that products traded under cover of a proof of origin which in the course of transport use a free zone or a customs warehouse situated in their territory in accordance with their domestic legislation, are not substituted by other goods and do not undergo handling other than normal operations designed to prevent their deterioration.

By means of an exemption to the provisions contained in paragraph 1, when products originating in the European Union or in Central America are imported into a free zone under cover of a proof of origin and undergo treatment or processing, the competent public authorities shall issue a new movement certificate EUR.1 at the exporter's request, if the treatment or processing undergone is in conformity with the provisions of this Annex.

TITLE VI

CEUTA AND MELILLA

Article 34

Application of this Annex

The term "European Union" used in Article 2 does not cover Ceuta and Melilla.

Products originating in Central America, when imported into Ceuta or Melilla, shall enjoy in all respects the same customs regime as that which is applied to products originating in the customs territory of the European Union under Protocol 2 of the Act of Accession of the Kingdom of Spain and the Portuguese Republic to the European Communities. The Republics of the CA Party shall grant to imports of products covered by the Agreement and originating in Ceuta and Melilla the same customs regime as that which is granted to products imported from and originating in the European Union.

For the purpose of the application of paragraph 2 concerning products originating in Ceuta and Melilla, this Annex shall apply mutatis mutandis subject to the special conditions set out in Article 35.

Article 35

Special conditions

Provided that they have been transported directly in accordance with the provisions of Article 12, the following shall be considered as:

(a)

products originating in Ceuta and Melilla:

(i)

products wholly obtained in Ceuta and Melilla;

(ii)

products obtained in Ceuta and Melilla in the manufacture of which products other than those referred to in (i) are used, provided that:

said products have undergone sufficient working or processing within the meaning of Article 5; or that

those products are originating in Central America or in the European Union, provided that they have been submitted to working or processing which goes beyond the operations referred to in Article 6.

(b)

products originating in Central America:

(i)

products wholly obtained in the Central America;

(ii)

products obtained in Central America, in the manufacture of which products other than those referred to in (i) are used, provided that:

the said products have undergone sufficient working or processing within the meaning of Article 5; or that

those products are originating in Ceuta and Melilla or in the European Union, provided that they have been submitted to working or processing which goes beyond the operations referred to in Article 6.

Ceuta and Melilla shall be considered as a single territory.

The exporter or his authorised representative shall enter "Central America" and "Ceuta and Melilla" in box 2 of movement certificates EUR.1 or on invoice declarations. In addition, in the case of products originating in Ceuta and Melilla, this shall be indicated in box 4 of movement certificates EUR.1 or on invoice declarations.

The Spanish customs authorities shall be responsible for the application of this Annex in Ceuta and Melilla.

TITLE VII

FINAL PROVISIONS

Article 36

Amendments to this Annex

The Association Council may decide to modify the provisions of the Appendixes to this Annex.

Article 37

Explanatory notes

The Parties shall agree "Explanatory Notes" regarding the interpretation, application and administration of this Annex within the Sub-Committee on Customs, Trade Facilitation and Rules of Origin, in order to recommend its approval by the Association Council.

Article 38

Transitional provisions for products in transit or storage

The provisions of this Agreement may be applied to products which comply with the provisions of this Annex and which on the date of entry into force of this Agreement are either in transit or are in the Parties in temporary storage in customs warehouses or in free zones, subject to the submission to the customs authorities of the importing Party, within four months of that date, of a proof of origin made out retrospectively together with the documents showing that the goods have been transported directly in accordance with Article 12.

Article 39

Transitional provision for cumulation purposes

The Parties for which this Agreement has entered into force in accordance with Article 353 of Part V (Final Provisions), may use materials originating in the Republics of the CA Party for which the Agreement has not yet entered into force. Article 3 of this Annex shall be applied mutatis mutandis.

Appendix 1

INTRODUCTORY NOTES TO ANNEX II

Note 1:

The list in Appendix 2 sets out the conditions required for all products to be considered as sufficiently worked or processed within the meaning of Article 5 of Annex II.

Note 2:

2.1. The first two columns in the list describe the product obtained. The first column gives the subheading number, heading number or chapter number used in the Harmonized System and the second column gives the description of goods used in that system for that subheading, heading or chapter. For each entry in the first two columns, a rule is specified in column 3 or 4. Where, in some cases, the entry in the first column is preceded by an "ex", this signifies that the rules in column 3 or 4 apply only to the part of that subheading, heading or chapter as described in column 2.

2.2. Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in column 3 or 4 apply to all products which, under the Harmonized System, are classified in headings of the chapter or in any of the headings grouped together in column 1.

2.3. Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in column 3 or 4.

2.4. Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt, as an alternative, to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 is to be applied.

Note 3:

3.1. The provisions of Article 5 of Annex II, concerning products having acquired originating status which are used in the manufacture of other products, shall apply, regardless of whether this status has been acquired inside the factory where these products are used or in another factory in the EU Party or in the Republics of the CA Party.

Example:

An engine of heading 8407 , for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 percent of the ex-works price, is made from "other alloy steel roughly shaped by forging" of heading ex 7224 .

If this forging has been forged in the EU Party from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading ex 7224 in the list. The forging can then count as originating in the value-calculation for the engine, regardless of whether it was produced in the same factory or in another factory in the EU Party. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used.

3.2. The rule in the list represents the minimum amount of working or processing required, and the carrying-out of more working or processing also confers originating status; conversely, the carrying-out of less working or processing cannot confer originating status. Thus, if a rule provides that non-originating material, at a certain level of manufacture, may be used, the use of such material at an earlier stage of manufacture is allowed, and the use of such material at a later stage is not.

3.3. Without prejudice to Note 3.2, where a rule uses the expression "Manufacture from materials of any heading", then materials of any heading(s) (even materials of the same description and heading as the product) may be used, subject, however, to any specific limitations which may also be contained in the rule.

However, the expression "Manufacture from materials of any heading, including other materials of heading…" or "Manufacture from materials of any heading, including other materials of the same heading as the product" means that materials of any heading(s) may be used, except those of the same description as the product as given in column 2 of the list.

3.4. When a rule in the list specifies that a product may be manufactured from more than one material, this means that one or more materials may be used. It does not require that all be used.

Example:

The rule for fabrics of headings 5208 to 5212 provides that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other, or both.

3.5. Where a rule in the list specifies that a product shall be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule. (See also Note 6.2 below in relation to textiles).

Example:

The rule for prepared foods of heading 1902 , which specifically excludes the use of cereals and their derivatives, does not prevent the use of mineral salts, chemicals and other additives which are not products from cereals.

However, this does not apply to products which, although they cannot be manufactured from the particular materials specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture.

Example:

In the case of an article of apparel of ex Chapter 62 made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth – even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn – that is, the fibre stage.

3.6. Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then these percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the higher of the percentages given. Furthermore, the individual percentages shall not be exceeded, in relation to the particular materials to which they apply.

Note 4:

4.1. The term "natural fibres" is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres which have been carded, combed or otherwise processed, but not spun.

4.2. The term "natural fibres" includes horsehair of heading 0511 , silk of headings 5002 and 5003 , as well as wool-fibres and fine or coarse animal hair of headings 5101 to 5105 , cotton fibres of headings 5201 to 5203 , and other vegetable fibres of headings 5301 to 5305 .

4.3. The terms "textile pulp", "chemical materials" and "paper-making materials" are used in the list to describe the materials, not classified in Chapters 50 to 63, which can be used to manufacture artificial, synthetic or paper fibres or yarns.

4.4. The term "man-made staple fibres" is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of headings 5501 to 5507 .

Note 5:

5.1. Where, for a given product in the list, reference is made to this Note, the conditions set out in column 3 shall not be applied to any basic textile materials used in the manufacture of this product and which, taken together, represent 10 percent or less of the total weight of all the basic textile materials used. (See also Notes 5.3 and 5.4 below.)

5.2. However, the tolerance mentioned in Note 5.1 may be applied only to mixed products which have been made from two or more basic textile materials.

The following are the basic textile materials:

—

silk,

—

wool,

—

coarse animal hair,

—

fine animal hair,

—

horsehair,

—

cotton,

—

paper-making materials and paper,

—

flax,

—

true hemp,

—

jute and other textile bast fibres,

—

sisal and other textile fibres of the genus Agave,

—

coconut, abaca, ramie and other vegetable textile fibres,

—

synthetic man-made filaments,

—

artificial man-made filaments,

—

current-conducting filaments,

—

synthetic man-made staple fibres of polypropylene,

—

synthetic man-made staple fibres of polyester,

—

synthetic man-made staple fibres of polyamide,

—

synthetic man-made staple fibres of polyacrylonitrile,

—

synthetic man-made staple fibres of polyimide,

—

synthetic man-made staple fibres of polytetrafluoroethylene,

—

synthetic man-made staple fibres of poly(phenylene sulphide),

—

synthetic man-made staple fibres of poly(vinyl chloride),

—

other synthetic man-made staple fibres,

—

artificial man-made staple fibres of viscose,

—

other artificial man-made staple fibres,

—

yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped,

—

yarn made of polyurethane segmented with flexible segments of polyester, whether or not gimped,

—

products of heading 5605 (metallised yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film,

—

other products of heading 5605 .

Example:

A yarn, of heading 5205 , made from cotton fibres of heading 5203 and synthetic staple fibres of heading 5506 , is a mixed yarn. Therefore, non-originating synthetic staple fibres which do not satisfy the origin-rules (which require manufacture from chemical materials or textile pulp) may be used, provided that their total weight does not exceed 10 percent of the weight of the yarn.

Example:

A woollen fabric, of heading 5112 , made from woollen yarn of heading 5107 and synthetic yarn of staple fibres of heading 5509 , is a mixed fabric. Therefore, synthetic yarn which does not satisfy the origin-rules (which require manufacture from chemical materials or textile pulp), or woollen yarn which does not satisfy the origin-rules (which require manufacture from natural fibres, not carded or combed or otherwise prepared for spinning), or a combination of the two, may be used, provided that their total weight does not exceed 10 percent of the weight of the fabric.

Example:

Tufted textile fabric, of heading 5802 , made from cotton yarn of heading 5205 and cotton fabric of heading 5210 , is only a mixed product if the cotton fabric is itself a mixed fabric made from yarns classified in two separate headings, or if the cotton yarns used are themselves mixtures.

Example:

If the tufted textile fabric concerned had been made from cotton yarn of heading 5205 and synthetic fabric of heading 5407 , then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is, accordingly, a mixed product.

5.3. In the case of products incorporating "yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped", this tolerance is 20 percent in respect of this yarn.

5.4. In the case of products incorporating "strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film", this tolerance is 30 percent in respect of this strip.

Note 6:

6.1. Where, in the list, reference is made to this Note, textile materials (with the exceptions of linings and interlinings), which do not satisfy the rule set out in the list in column 3 for the made-up product concerned, may be used, provided that they are classified in a heading other than that of the product and that their value does not exceed 8 percent of the ex-works price of the product.

6.2. Without prejudice to Note 6.3, materials, which are not classified within Chapters 50 to 63, may be used freely in the manufacture of textile products, whether or not they contain textiles.

Example:

If a rule in the list provides that, for a particular textile item (such as trousers), yarn shall be used, this does not prevent the use of metal items, such as buttons, because buttons are not classified within Chapters 50 to 63. For the same reason, it does not prevent the use of slide-fasteners, even though slide-fasteners normally contain textiles.

6.3. Where a percentage-rule applies, the value of materials which are not classified within Chapters 50 to 63 shall be taken into account when calculating the value of the non-originating materials incorporated.

Note 7:

7.1. For the purposes of headings ex 2707 , 2713 to 2715 , ex 2901 , ex 2902 and ex 3403 , the "specific processes" are the following:

(a)

vacuum-distillation;

(b)

redistillation by a very thorough fractionation-process;

(c)

cracking;

(d)

reforming;

(e)

extraction by means of selective solvents;

(f)

the process comprising all of the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally-active earth, activated earth, activated charcoal or bauxite;

(g)

polymerisation;

(h)

alkylation;

(i)

isomerisation.

7.2. For the purposes of headings 2710 , 2711 and 2712 , the "specific processes" are the following:

(a)

vacuum-distillation;

(b)

redistillation by a very thorough fractionation-process;

(c)

cracking;

(d)

reforming;

(e)

extraction by means of selective solvents;

(f)

(g)

polymerisation;

(h)

alkylation;

(i)

isomerisation;

(j)

in respect of heavy oils of heading ex 2710 only, desulphurisation with hydrogen, resulting in a reduction of at least 85 percent of the sulphur-content of the products processed (ASTM D 1266-59 T method);

(k)

in respect of products of heading 2710 only, deparaffining by a process other than filtering;

(l)

in respect of heavy oils of heading ex 2710 only, treatment with hydrogen, at a pressure of more than 20 bar and a temperature of more than 250 °C, with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment, with hydrogen, of lubricating oils of heading ex 2710 (e.g. hydrofinishing or decolourisation), in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;

(m)

in respect of fuel oils of heading ex 2710 only, atmospheric distillation, on condition that less than 30 percent of these products distils, by volume, including losses, at 300 °C, by the ASTM D 86 method;

(n)

in respect of heavy oils other than gas oils and fuel oils of heading ex 2710 only, treatment by means of a high-frequency electrical brush-discharge;

(o)

in respect of crude products (other than petroleum jelly, ozokerite, lignite wax or peat wax, paraffin wax containing by weight less than 0.75 percent of oil) of heading ex 2712 only, de-oiling by fractional crystallisation.

7.3. For the purposes of headings ex 2707 , 2713 to 2715 , ex 2901 , ex 2902 and ex 3403 , simple operations, such as cleaning, decanting, desalting, water-separation, filtering, colouring, marking, obtaining a sulphur-content as a result of mixing products with different sulphur-contents, or any combination of these operations or like operations, do not confer origin.

Note 8:

For the purpose of Article 4 of Annex II agricultural and horticultural goods grown in the territory of a Party shall be treated as originating in the territory of that Party even if grown from seeds, bulbs, rootstock, cuttings, grafts, shoots, buds, or other live parts of plants imported from a non-Party.

Note 9:

For the purpose of Article 6 of Annex II "simple" describes activities which need neither special skills nor machines, apparatus or equipment specially produced or installed for carrying out the activity. However, simple mixing does not include chemical reaction. Chemical reaction means a process (including a biochemical process) which results in a molecule with new structure by breaking intramolecular bonds and by forming new intramolecular bonds, or by altering the spatial arrangement of atoms in a molecule.

▼M5

Appendix 2

LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER THAT THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS

The products mentioned in the list may not be all covered by this Agreement. It is therefore necessary to consult the other parts of this Agreement.

HS code 2022	Description of product	Working or processing, carried out on non-originating materials, which confers originating status
(1)	(2)	(3)	(4)
Chapter 01	Live animals	All the animals of Chapter 01 are wholly obtained
Chapter 02	Meat and edible meat offal	Manufacture in which all the materials of Chapters 01 and 02 used are wholly obtained
Chapter 03	Fish and crustaceans, molluscs and other aquatic invertebrates	Manufacture in which all the materials of Chapter 03 used are wholly obtained
ex Chapter 04	Dairy produce; birds’ eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for:	Manufacture in which all the materials of Chapter 04 used are wholly obtained
0403	Yogurt; buttermilk, curdled milk and cream, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa	Manufacture in which: — all the materials of Chapter 04 used are wholly obtained, — all the fruit juice (except that of pineapple, lime or grapefruit) of heading 2009 used is originating, and — the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
0410	Insects and other edible products of animal origin, not elsewhere specified or included	Manufacture in which all the materials of Chapters 01 and 04 used are wholly obtained
ex Chapter 05	Products of animal origin, not elsewhere specified or included; except for:	Manufacture in which all the materials of Chapter 05 used are wholly obtained
ex 05 02	Prepared pigs’, hogs’ or boars’ bristles and hair	Cleaning, disinfecting, sorting and straightening of bristles and hair
Chapter 06 (1)	Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage	Manufacture from materials of any heading, except that of the product
Chapter 07 (2)	Edible vegetables and certain roots and tubers	Manufacture in which all the products of Chapter 07 are wholly obtained
Chapter 08 (3)	Edible fruit and nuts; peel of citrus fruit or melons	Manufacture in which: — all the fruit and nuts are wholly obtained, and — the value of all the materials of Chapter 17 used does not exceed 30 % of the value of the ex-works price of the product
ex Chapter 09 (4)	Coffee, tea, maté and spices; except for:	Manufacture in which all the materials of Chapter 09 used are wholly obtained
0902	Tea, whether or not flavoured	Manufacture from materials of any heading
ex 09 10	Mixtures of spices	Manufacture from materials of any heading
Chapter 10 (5)	Cereals	Manufacture in which all the products of Chapter 10 are wholly obtained
ex Chapter 11 (6)	Products of the milling industry; malt; starches; inulin; wheat gluten; except for:	Manufacture in which all the cereals, edible vegetables, roots and tubers of heading 0714 or fruit used are wholly obtained
1101	Wheat or meslin flour	Manufacture from materials of any heading, except that of the product
ex 11 02 and ex 11 03	Corn flour, groats and meal of corn	Manufacture from materials of any heading, except that of the product, in which at least 50 % by weight of maize of heading 1005 is originating
ex 11 06	Flour, meal and powder of the dried, shelled leguminous vegetables of heading 0713	Drying and milling of leguminous vegetables of heading 0708
Chapter 12 (7)	Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder	Manufacture in which all the materials of Chapter 12 used are wholly obtained
1301	Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)	Manufacture in which the value of all the materials of heading 1301 used does not exceed 50 % of the ex-works price of the product
1302	Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:
	— Mucilages and thickeners, modified, derived from vegetable products	Manufacture from non-modified mucilages and thickeners
	— Other	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 14 (8)	Vegetable plaiting materials; vegetable products not elsewhere specified or included	Manufacture in which all the materials of Chapter 14 used are wholly obtained
ex Chapter 15	Animal, vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes; except for:	Manufacture from materials of any heading, except that of the product in which all the vegetal materials of heading 1511 and 1513 used are wholly obtained
1501	Pig fat (including lard) and poultry fat, other than that of heading 0209 or 1503 :
	— Fats from bones or waste	Manufacture from materials of any heading, except those of heading 0203 , 0206 or 0207 or bones of heading 0506
	— Other	Manufacture from meat or edible offal of swine of heading 0203 or 0206 or of meat and edible offal of poultry of heading 0207
1502	Fats of bovine animals, sheep or goats, other than those of heading 1503 :
	— Fats from bones or waste	Manufacture from materials of any heading, except those of heading 0201 , 0202 , 0204 or 0206 or bones of heading 0506
	— Other	Manufacture in which all the materials of Chapter 02 used are wholly obtained
1504	Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified:
	— Solid fractions	Manufacture from materials of any heading, including other materials of heading 1504
	— Other	Manufacture in which all the materials of Chapters 02 and 03 used are wholly obtained
ex 15 05	Refined lanolin	Manufacture from crude wool grease of heading 1505
1506	Other animal fats and oils and their fractions, whether or not refined, but not chemically modified:
	— Solid fractions	Manufacture from materials of any heading, including other materials of heading 1506
	— Other	Manufacture in which all the materials of Chapter 02 used are wholly obtained
1507 to 1510	— Soya oil, groundnut oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption	Manufacture from materials of any heading, except that of the product
	— Solid fractions	Manufacture from other materials of headings 1507 to 1510
	— Other	Manufacture in which all the vegetable materials used are wholly obtained
1511	Palm oil and its fractions, whether or not refined but not chemically modified	Manufacture in which all the vegetable materials used are wholly obtained
1512	— Oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption	Manufacture from materials of any heading, except that of the product
	— Solid fractions	Manufacture from other materials of heading 1512
	— Other	Manufacture in which all the vegetable materials used are wholly obtained
1513	Coconut (copra), palm kernel or babassu oil and fractions thereof, whether or not refined but not chemically modified	Manufacture in which all the vegetable materials used are wholly obtained
1514 to 1515	— Tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption	Manufacture from materials of any heading, except that of the product
	— Solid fractions, except for that of jojoba oil	Manufacture from other materials of headings 1514 to 1515
	— Other	Manufacture in which all the vegetable materials used are wholly obtained
1516	Animal, vegetable or microbial fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared	Manufacture in which: — all the materials of Chapter 02 used are wholly obtained, and — all the vegetable materials used are wholly obtained. However, materials of headings 1507 and 1508 may be used
1517	Margarine; edible mixtures or preparations of animal, vegetable or microbial fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516	Manufacture in which: — all the materials of Chapters 02 and 04 used are wholly obtained, and — all the vegetable materials used are wholly obtained. However, materials of headings 1507 and 1508 may be used
Chapter 16 (9)	Preparations of meat, of fish, crustaceans, molluscs or other aquatic invertebrates, or of insects	Manufacture: — from animals of Chapter 01, and/or — in which all the materials of Chapter 03 used are wholly obtained
1701	Cane or beet sugar and chemically pure sucrose, in solid form	Manufacture in which all the materials of Chapter 17 used are wholly obtained
1702	Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel:
	— Chemically-pure maltose and fructose	Manufacture from materials of any heading, including other materials of heading 1702
	— Other sugars in solid form, containing added flavouring or colouring matter	Manufacture in which all the materials of Chapter 17 used are wholly obtained
	— Other	Manufacture in which all the materials used are originating
1703	Molasses resulting from the extraction or refining of sugar	Manufacture in which all the materials of Chapter 17 used are wholly obtained
1704	Sugar confectionery (including white chocolate), not containing cocoa	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17, except of materials from subheading 1702 30 , used does not exceed 30 % of the ex-works price of the product
Chapter 18	Cocoa and cocoa preparations	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17, except of materials from subheading 1702 30 , used does not exceed 30 % of the ex-works price of the product
1901	Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:
	— Malt extract	— Manufacture from cereals of Chapter 10
	— Other	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1902	Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared:
	— Containing 20 % or less by weight of meat, meat offal, fish, crustaceans or molluscs	Manufacture in which all the cereals and derivatives (except durum wheat and its derivatives) used are wholly obtained
	— Containing more than 20 % by weight of meat, meat offal, fish, crustaceans or molluscs	Manufacture in which: — all the cereals and their derivatives (except durum wheat and its derivatives) used are wholly obtained, and — all the materials of Chapters 02 and 03 used are wholly obtained
1903	Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms	Manufacture from materials of any heading, except potato starch of heading 1108
1904	Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked or otherwise prepared, not elsewhere specified or included	Manufacture: — from materials of any heading, except those of headings 1006 and 1806 , — in which all the materials of Chapter 11 are originating, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1905	Bread, pastry, cakes, biscuits and other bakers’ wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products	Manufacture from materials of any heading, except those of Chapter 11
ex Chapter 20	Preparations of vegetables, fruit, nuts or other parts of plants; except for:	Manufacture in which all the vegetables, fruit or nuts used are wholly obtained. However, black split beans of heading ex 07 13 may be used
ex 20 01	Yams, sweet potatoes and similar edible parts of plants containing 5 % or more by weight of starch, prepared or preserved by vinegar or acetic acid	Manufacture from materials of any heading, except that of the product
ex 20 04 and ex 20 05	Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid	Manufacture from materials of any heading, except that of the product
2006	Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallized)	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
2007	Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, obtained by cooking, whether or not containing added sugar or other sweetening matter	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex 20 08	— Nuts, not containing added sugar or spirits	Manufacture from materials of any heading in which the value of all non originating materials of heading 1202 used does not exceed 40 % of the ex-works price of the product
	— Peanut butter; mixtures based on cereals; palm hearts; maize (corn)	Manufacture from materials of any heading in which the value of all non originating materials of heading 1202 used does not exceed 40 % of the ex-works price of the product
	— Other except for fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
2009	Fruit or nut juices (including grape must and coconut water) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex Chapter 21	Miscellaneous edible preparations; except for:	Manufacture from materials of any heading, except that of the product
2101	Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof	Manufacture: — from materials of any heading, except that of the product, and — in which all the coffee of heading 0901 used is wholly obtained
2103	Sauces and preparations therefore; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard:
	— Sauces and preparations therefore; mixed condiments and mixed seasonings	Manufacture from materials of any heading, except that of the product. However, mustard flour or meal or prepared mustard may be used
	— Mustard flour and meal and prepared mustard	Manufacture from materials of any heading
ex 21 04	Soups and broths and preparations therefore	Manufacture from materials of any heading, except prepared or preserved vegetables of headings 2002 to 2005
2106	Food preparations not elsewhere specified or included	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex Chapter 22	Beverages, spirits and vinegar; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which all the grapes or materials derived from grapes used are wholly obtained
2202	Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit, nut or vegetable juices of heading 2009	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
2207	Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher; ethyl alcohol and other spirits, denatured, of any strength	Manufacture: — from materials of any heading, except heading 1005 , 1007 , 1703 , 2207 or 2208 , and — in which all the grapes or materials derived from grapes used are wholly obtained
2208	Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages:
	— Rum and other spirits obtained by distilling fermented sugar-cane products:	Manufacture from materials of any heading, except that of the product and heading 1703 or 2207
	— Other	Manufacture: — from materials of any heading, except heading 2207 or 2208 , and — in which all the grapes or materials derived from grapes used are wholly obtained
ex Chapter 23	Residues and waste from the food industries; prepared animal fodder; except for:	Manufacture from materials of any heading, except that of the product
ex 23 01	Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption	Manufacture in which all the materials of Chapters 02 and 03 used are wholly obtained
ex 23 03	Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 % by weight	Manufacture in which all the maize used is wholly obtained
ex 23 06	Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3 % of olive oil	Manufacture in which all the vegetable materials used are wholly obtained
ex 23 08	Other	Manufacture in which all the vegetable materials used are wholly obtained
2309	Preparations of a kind used in animal feeding:
	— Dog or cat food, put up for retail sale	Manufacture in which: — the value of all cereals of Chapter 10 used does not exceed 50 % of the ex-works price of the product, and — sugar, molasses, meat or milk used are originating, and — all the materials of Chapter 03 used are wholly obtained
	— Other	Manufacture in which: — all the cereals, sugar or molasses, meat or milk used are originating, and — all the materials of Chapter 03 used are wholly obtained
ex Chapter 24	Tobacco and manufactured tobacco substitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body; except for:	Manufacture in which all the materials of Chapter 24 used are wholly obtained
2402	Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes	Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating
ex 24 03	Smoking tobacco	Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating
2404.11	Products intended for inhalation without combustion containing tobacco or reconstituted tobacco	Manufacture in which all the materials of Chapter 24 used are wholly obtained
2404.12	Products intended for inhalation without combustion containing nicotine	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
2404.19	Products intended for inhalation without combustion: — Containing tobacco substitutes — Other	Manufacture in which all the materials of Chapter 24 used are wholly obtained Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
2404.91	Other nicotine containing products intended for the intake of nicotine into the human body for oral application	Manufacture — from materials of any heading except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
2404.92	Other nicotine containing products intended for the intake of nicotine into the human body for transdermal application	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
2404.99	Other nicotine containing products intended for the intake of nicotine into the human body other than inhalation without combustion, oral or transdermal application	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 25	Salt; sulphur; earths and stone; plastering materials, lime and cement; except for:	Manufacture from materials of any heading, except that of the product
ex 25 04	Natural crystalline graphite, with enriched carbon content, purified and ground	Enriching of the carbon content, purifying and grinding of crude crystalline graphite
ex 25 15	Marble, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm	Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm
ex 25 16	Granite, porphyry, basalt, sandstone and other monumental or building stone, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm	Cutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding 25 cm
ex 25 18	Calcined dolomite	Calcination of dolomite not calcined
ex 25 19	Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia	Manufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used
ex 25 20	Plasters specially prepared for dentistry	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 25 24	Natural asbestos fibres	Manufacture from asbestos concentrate
ex 25 25	Mica powder	Grinding of mica or mica waste
ex 25 30	Earth colours, calcined or powdered	Calcination or grinding of earth colours
Chapter 26	Ores, slag and ash	Manufacture from materials of any heading, except that of the product
ex Chapter 27	Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for:	Manufacture from materials of any heading, except that of the product
ex 27 07	Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels	Operations of refining and/or one or more specific process(es) (10) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
ex 27 09	Crude oils obtained from bituminous minerals	Destructive distillation of bituminous materials
2710	Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils	Operations of refining and/or one or more specific process(es) (11) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2711	Petroleum gases and other gaseous hydrocarbons	Operations of refining and/or one or more specific process(es) (12) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2712	Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured	Operations of refining and/or one or more specific process(es) (13) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2713	Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals	Operations of refining and/or one or more specific process(es) (14) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2714	Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks	Operations of refining and/or one or more specific process(es) (15) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
2715	Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)	Operations of refining and/or one or more specific process(es) (16) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
ex Chapter 28	Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 28 05	“Mischmetall”	Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 28 11	Sulphur trioxide	Manufacture from sulphur dioxide	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 28 33	Aluminium sulphate	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 28 40	Sodium perborate	Manufacture from disodium tetraborate pentahydrate	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 28 52	— Mercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives	Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Mercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic mercury compounds	Manufacture from materials of any heading. However, the value of all the materials of headings 2852 , 2932 , 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, other than those of heading 3002 or 3006 ; certified reference materials	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 29	Organic chemicals; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 29 01	Acyclic hydrocarbons for use as power or heating fuels	Operations of refining and/or one or more specific process(es) (17) or
		Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
ex 29 02	Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels	Operations of refining and/or one or more specific process(es) (18) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
ex 29 05	Metal alcoholates of alcohols of this heading and of ethanol	Manufacture from materials of any heading, including other materials of heading 2905 . However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
2915	Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives	Manufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 29 32	— Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives	Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives	Manufacture from materials of any heading	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
2933	Heterocyclic compounds with nitrogen hetero-atom(s) only	Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
2934	Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds	Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 29 39	Concentrates of poppy straw containing not less than 50 % by weight of alkaloids	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 30	Pharmaceutical products; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product
3001	Glands and other organs for organo therapeutic uses, dried, whether or not powdered; extracts of glands or other organs or their secretions for organo-therapeutic uses; heparin and its salts; other human or animal substances prepared for therapeutic or prophylactic uses, not elsewhere specified or included	Manufacture from materials of any heading
3002	Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera and other blood fractions and modified immunological products, whether or not obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products; cell cultures, whether or not modified:	Manufacture from materials of any heading
	— Other carboxyimide-function compounds (including saccharin and its salts) and imine-function compounds, in the form of peptides and proteins which are directly involved in the regulation of immunological processes — Other hormones, prostaglandins, thromboxanes and leukotrienes, natural or reproduced by synthesis, in the form of peptides and proteins (other than goods of heading 2937 ) which are directly involved in the regulation of immunological processes; derivatives and structural analogues thereof, including chain modified polypeptides, used primarily as hormones, in the form of peptides and proteins (other than goods of heading 2937 ) which are directly involved in the regulation of immunological processes	Manufacture from materials of any heading except that of the product. However, materials of the same heading as the product may be used provided that their total value does not exceed 20% of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	— Other heterocyclic compounds with nitrogen hetero-atom(s) only, containing an unfused imidazole ring (whether or not hydrogenated) in the structure, in the form of peptides and proteins which are directly involved in the regulation of immunological processes	Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	— Other nucleic acids and their salts, whether or not chemically defined, in the form of peptides and proteins which are directly involved in the regulation of immunological processes; other heterocyclic compounds, in the form of peptides and proteins which are directly involved in the regulation of immunological processes	Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
	— Other polyethers, in primary forms, in the form of peptides and proteins which are directly involved in the regulation of immunological processes	Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
3003 and 3004	Medicaments (excluding goods of heading 3002 , 3005 or 3006 )	Manufacture from materials of any heading, except that of the product and heading 3003
ex 30 06	— Waste pharmaceuticals specified in note 4(k) to this Chapter — Sterile surgical or dental adhesion barriers, whether or not absorbable:	The origin of the product in its original classification shall be retained
	— made of plastics	Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
	— made of fabrics	Manufacture from (19): — natural fibres — man-made staple fibres, not carded or combed or otherwise processed for spinning, — or — chemical materials or textile pulp
	— Appliances identifiable for ostomy use	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3006.93	Placebos and blinded (or double-blinded) clinical trial kits for a recognised clinical trial, put up in measured doses: — If made of sugar	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17, except of materials from subheading 1702 30 , used does not exceed 30 % of the ex-works price of the product
	— If made of starch or other foodstuff; or if in liquid form for oral intake;	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
	— If kits containing medicaments	Manufacture from materials of any heading, except that of the product and heading 3003
	— If containing other chemicals	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 31	Fertilizers; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 31 05	Mineral or chemical fertilizers containing two or three of the fertilizing elements nitrogen, phosphorous and potassium; other fertilizers; goods of this chapter, in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for: — sodium nitrate — calcium cyanamide — potassium sulphate — magnesium potassium sulphate	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 30 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 32	Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 32 01	Tannins and their salts, ethers, esters and other derivatives	Manufacture from tanning extracts of vegetable origin	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3205	Colour lakes; preparations as specified in note 3 to this chapter based on colour lakes (20)	Manufacture from materials of any heading, except headings 3203 , 3204 and 3205 . However, materials of heading 3205 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 33	Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3301	Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils	Manufacture from materials of any heading, including materials of a different “group” (21) in this heading. However, materials of the same group as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 34	Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, “dental waxes” and dental preparations with a basis of plaster; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 34 03	Lubricating preparations containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals	Operations of refining and/or one or more specific process(es) (22) or Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
3404	Artificial waxes and prepared waxes:
	— With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product
	— Other	Manufacture from materials of any heading, except: — hydrogenated oils having the character of waxes of heading 1516 , — fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading 3823 , and — materials of heading 3404 However, these materials may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 35	Albuminoidal substances; modified starches; glues; enzymes; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3505	Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches:
	— Starch ethers and esters	Manufacture from materials of any heading, including other materials of heading 3505	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture from materials of any heading, except those of heading 1108	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 35 07	Prepared enzymes not elsewhere specified or included	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 36	Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 37	Photographic or cinematographic goods; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3701	Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs:
	— Instant print film for colour photography, in packs	Manufacture from materials of any heading, except those of headings 3701 and 3702 . However, materials of heading 3702 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture from materials of any heading, except those of headings 3701 and 3702 . However, materials of headings 3701 and 3702 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3702	Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed	Manufacture from materials of any heading, except those of headings 3701 and 3702	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3704	Photographic plates, film paper, paperboard and textiles, exposed but not developed	Manufacture from materials of any heading, except those of headings 3701 to 3704	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 38	Miscellaneous chemical products; except for:	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 38 01	— Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
	— Graphite in paste form, being a mixture of more than 30 % by weight of graphite with mineral oils	Manufacture in which the value of all the materials of heading 3403 used does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 38 03	Refined tall oil	Refining of crude tall oil	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 38 05	Spirits of sulphate turpentine, purified	Purification by distillation or refining of raw spirits of sulphate turpentine	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 38 06	Ester gums	Manufacture from resin acids	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 38 07	Wood pitch (wood tar pitch)	Distillation of wood tar	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3808	Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
3809	Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
3810	Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
3811	Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:
	— Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals	Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 % of the ex-works price of the product
	— Other	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3812	Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidizing preparations and other compound stabilizers for rubber or plastics	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3813	Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3814	Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 38 16	Dolomite ramming mix	Manufacture from materials of any heading, except that of the product
3818	Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3819	Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3820	Anti-freezing preparations and prepared de-icing fluids	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 38 21	Prepared culture media for maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3822	Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits, other than those of heading 3006 ; certified reference materials; except:	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
	— For malaria	Manufacture from materials of any heading
	— For blood-grouping reagents	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product
3823	Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols:
	— Industrial monocarboxylic fatty acids, acid oils from refining	Manufacture from materials of any heading, except that of the product
	— Industrial fatty alcohols	Manufacture from materials of any heading, including other materials of heading 3823
3824	Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:
	— The following of this heading: — — Prepared binders for foundry moulds or cores based on natural resinous products — Naphthenic acids, their water-insoluble salts and their esters — Sorbitol other than that of heading 2905 — Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts — Ion exchangers — Getters for vacuum tubes — Alkaline iron oxide for the purification of gas — Ammoniacal gas liquors and spent oxide produced in coal gas purification — Sulphonaphthenic acids, their water-insoluble salts and their esters — Fusel oil and Dippels oil — Mixtures of salts having different anions — Copying pastes with a basis of gelatin, whether or not on a paper or textile backing	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3826	Biodiesel and mixtures thereof, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals	Manufacturing in which the value of all the materials used does not exceed 50% of the ex-works price of the product
3827	Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3901 to 3915	Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 39 07 and 3912 for which the rules are set out below:
	— Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content	Manufacture in which: — the value of all the materials used does not exceed 50 % of the ex-works price of the product, and — within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (23)	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
	— Other	Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (24)	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 39 07	— Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)	Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product (25)
	— Polyester	Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)
3912	Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms	Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product
3916 to 3919	Semi-manufactures and articles of plastics	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
3920 (26)	Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3921 to 3926	Articles of plastics	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 40	Rubber and articles thereof; except for:	Manufacture from materials of any heading, except that of the product
4005	Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip	Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50 % of the ex-works price of the product
4012	Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber:
	— Retreaded pneumatic, solid or cushion tyres, of rubber	Retreading of used tyres
	— Other	Manufacture from materials of any heading, except those of headings 4011 and 4012
ex 40 17	Articles of hard rubber	Manufacture from hard rubber
ex Chapter 41	Raw hides and skins (other than furskins) and leather; except for:	Manufacture from materials of any heading, except that of the product
ex 41 02	Raw skins of sheep or lambs, without wool on	Removal of wool from sheep or lamb skins, with wool on
4104 to 4106	Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared	Retanning of tanned leather or Manufacture from materials of any heading, except that of the product
4107 , 4112 and 4113	Leather further prepared after tanning or crusting, including parchment-dressed leather, without wool or hair on, whether or not split, other than leather of heading 4114	Manufacture from materials of any heading, except headings 4104 to 4113
ex 41 14	Patent leather and patent laminated leather; metallised leather	Manufacture from materials of headings 4104 to 4106 , 4107 , 4112 or 4113 , provided that their total value does not exceed 50 % of the ex-works price of the product
Chapter 42	Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)	Manufacture from materials of any heading, except that of the product
ex Chapter 43	Furskins and artificial fur; manufactures thereof; except for:	Manufacture from materials of any heading, except that of the product
ex 43 02	Tanned or dressed furskins, assembled:
	— Plates, crosses and similar forms	Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins
	— Other	Manufacture from non-assembled, tanned or dressed furskins
4303	Articles of apparel, clothing accessories and other articles of furskin	Manufacture from non-assembled tanned or dressed furskins of heading 4302
ex Chapter 44	Wood and articles of wood; wood charcoal; except for:	Manufacture from materials of any heading, except that of the product
ex 44 03	Wood roughly squared	Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down
ex 44 07	Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed	Planing, sanding or end-jointing
ex 44 08	Sheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed	Splicing, planing, sanding or end-jointing
ex 44 09	Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed:
	— Sanded or end-jointed	Sanding or end-jointing
	— Beadings and mouldings	Beading or moulding
ex 44 10 to ex 44 13	Beadings and mouldings, including moulded skirting and other moulded boards	Beading or moulding
ex 44 15	Packing cases, boxes, crates, drums and similar packings, of wood	Manufacture from boards not cut to size
ex 44 16	Casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood	Manufacture from riven staves, not further worked than sawn on the two principal surfaces
ex 44 18	— Builders’ joinery and carpentry of wood	Manufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used
	— Beadings and mouldings	Beading or moulding
ex 44 21	Match splints; wooden pegs or pins for footwear	Manufacture from wood of any heading, except drawn wood of heading 4409
ex Chapter 45	Cork and articles of cork; except for:	Manufacture from materials of any heading, except that of the product
4503	Articles of natural cork	Manufacture from cork of heading 4501
Chapter 46	Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork	Manufacture from materials of any heading, except that of the product
Chapter 47	Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard	Manufacture from materials of any heading, except that of the product
ex Chapter 48 (27)	Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for:	Manufacture from materials of any heading, except that of the product
ex 48 11	Paper and paperboard, ruled, lined or squared only	Manufacture from paper-making materials of Chapter 47
4816	Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading 4809 ), duplicator stencils and offset plates, of paper, whether or not put up in boxes	Manufacture from paper-making materials of Chapter 47
4817	Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 48 18	Toilet paper	Manufacture from paper-making materials of Chapter 47
ex 48 19	Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 48 20	Letter pads	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 48 23	Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape	Manufacture from paper-making materials of Chapter 47
ex Chapter 49	Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for:	Manufacture from materials of any heading, except that of the product
4909	Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings	Manufacture from materials of any heading, except those of headings 4909 and 4911
4910	Calendars of any kind, printed, including calendar blocks:
	— Calendars of the “perpetual” type or with replaceable blocks mounted on bases other than paper or paperboard	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
	— Other	Manufacture from materials of any heading, except those of headings 4909 and 4911
ex Chapter 50	Silk; except for:	Manufacture from materials of any heading, except that of the product
ex 50 03	Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed	Carding or combing of silk waste
5004 to ex 50 06	Silk yarn and yarn spun from silk waste	Manufacture from (28): — raw silk or silk waste, carded or combed or otherwise prepared for spinning, — other natural fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper-making materials
5007	Woven fabrics of silk or of silk waste:
	— Incorporating rubber thread	Manufacture from single yarn (29)
	— Other	Manufacture from (30): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 51	Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for:	Manufacture from materials of any heading, except that of the product
5106 to 5110	Yarn of wool, of fine or coarse animal hair or of horsehair	Manufacture from (31): — raw silk or silk waste, carded or combed or otherwise prepared for spinning, — natural fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper-making materials
5111 to 5113	Woven fabrics of wool, of fine or coarse animal hair or of horsehair:
	— Incorporating rubber thread	Manufacture from single yarn (32)
	— Other	Manufacture from (33): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 52	Cotton; except for:	Manufacture from materials of any heading, except that of the product
5204 to 5207	Yarn and thread of cotton	Manufacture from (34): — raw silk or silk waste, carded or combed or otherwise prepared for spinning, — natural fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper-making materials
5208 to 5212	Woven fabrics of cotton:
	— Incorporating rubber thread	Manufacture from single yarn (35)
	— Other	Manufacture from (36): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 53	Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for:	Manufacture from materials of any heading, except that of the product
5306 to 5308	Yarn of other vegetable textile fibres; paper yarn	Manufacture from (37): — raw silk or silk waste, carded or combed or otherwise prepared for spinning, — natural fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper-making materials
5309 to 5311	Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn:
	— Incorporating rubber thread	Manufacture from single yarn (38)
	— Other	Manufacture from (39): — coir yarn, — jute yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5401 to 5406	Yarn, monofilament and thread of man-made filaments	Manufacture from (40): — raw silk or silk waste, carded or combed or otherwise prepared for spinning, — natural fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper-making materials
5407 and 5408	Woven fabrics of man-made filament yarn:
	— Incorporating rubber thread	Manufacture from single yarn (41)
	— Other	Manufacture from (42): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5501 to 5507	Man-made staple fibres	Manufacture from chemical materials or textile pulp
5508 to 5511	Yarn and sewing thread of man-made staple fibres	Manufacture from (43): — raw silk or silk waste, carded or combed or otherwise prepared for spinning, — natural fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper-making materials
5512 to 5516	Woven fabrics of man-made staple fibres:
	— Incorporating rubber thread	Manufacture from single yarn (44)
	— Other	Manufacture from (45): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise prepared for spinning, — chemical materials or textile pulp, or — paper or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 56	Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for:	Manufacture from (46): — coir yarn, — natural fibres, — chemical materials or textile pulp, or — paper-making materials
5602	Felt, whether or not impregnated, coated, covered or laminated:
	— Needleloom felt	Manufacture from (47): — natural fibres, or — chemical materials or textile pulp However: — polypropylene filament of heading 5402 , — polypropylene fibres of heading 5503 or 5506 , or — polypropylene filament tow of heading 5501 , of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture from (48): — natural fibres, — man-made staple fibres made from casein, or — chemical materials or textile pulp
5604	Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405 , impregnated, coated, covered or sheathed with rubber or plastics:
	— Rubber thread and cord, textile covered	Manufacture from rubber thread or cord, not textile covered
	— Other	Manufacture from (49): — natural fibres, not carded or combed or otherwise processed for spinning, — chemical materials or textile pulp, or — paper-making materials
5605	Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , combined with metal in the form of thread, strip or powder or covered with metal	Manufacture from (50): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, — chemical materials or textile pulp, or — paper-making materials
5606	Gimped yarn, and strip and the like of heading 5404 or 5405 , gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn	Manufacture from (51): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, — chemical materials or textile pulp, or — paper-making materials
Chapter 57	Carpets and other textile floor coverings:
	— Of needleloom felt	Manufacture from (52): — natural fibres, or — chemical materials or textile pulp However: — polypropylene filament of heading 5402 , — polypropylene fibres of heading 5503 or 5506 , or — polypropylene filament tow of heading 5501 , of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product Jute fabric may be used as a backing
	— Of other felt	Manufacture from (53): — natural fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
	— Other	Manufacture from (54): — coir yarn or jute yarn, — synthetic or artificial filament yarn, — natural fibres, or — man-made staple fibres, not carded or combed or otherwise processed for spinning Jute fabric may be used as a backing
ex Chapter 58	Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for:
	— Combined with rubber thread	Manufacture from single yarn (55)
	— Other	Manufacture from (56): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5805	Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up	Manufacture from materials of any heading, except that of the product
5810	Embroidery in the piece, in strips or in motifs	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
5901	Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations	Manufacture from yarn
5902	Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon:
	— Containing not more than 90 % by weight of textile materials	Manufacture from yarn
	— Other	Manufacture from chemical materials or textile pulp
5903	Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902	Manufacture from yarn or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5904	Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape	Manufacture from yarn (57)
5905	Textile wall coverings:
	— Impregnated, coated, covered or laminated with rubber, plastics or other materials	Manufacture from yarn
	— Other	Manufacture from (58): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5906	Rubberised textile fabrics, other than those of heading 5902 :
	— Knitted or crocheted fabrics	Manufacture from (59): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
	— Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials	Manufacture from chemical materials
	— Other	Manufacture from yarn
5907	Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like	Manufacture from yarn or Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5908	Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefore, whether or not impregnated:
	— Incandescent gas mantles, impregnated	Manufacture from tubular knitted gas-mantle fabric
	— Other	Manufacture from materials of any heading, except that of the product
5909 to 5911	Textile articles of a kind suitable for industrial use:
	— Polishing discs or rings other than of felt of heading 5911	Manufacture from yarn or waste fabrics or rags of heading 6310
	— Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911	Manufacture from (60): — coir yarn, — the following materials: — — yarn of polytetrafluoroethylene (61) — yarn, multiple, of polyamide, coated impregnated or covered with a phenolic resin, — yarn of synthetic textile fibres of aromatic polyamides, obtained by polycondensation of m-phenylenediamine and isophthalic acid, — monofil of polytetrafluoroethylene (62), — yarn of synthetic textile fibres of poly(p-phenylene terephthalamide), — glass fibre yarn, coated with phenol resin and gimped with acrylic yarn (63), — copolyester monofilaments of a polyester and a resin of terephthalic acid and 1,4-cyclohexanediethanol and isophthalic acid, — natural fibres, — man-made staple fibres not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
	— Other	Manufacture from (64): — coir yarn, — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
Chapter 60	Knitted or crocheted fabrics	Manufacture from (65): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
Chapter 61 (66)	Articles of apparel and clothing accessories, knitted or crocheted:
	— Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form	Manufacture from yarn (67) , (68)
	— Other	Manufacture from (69): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
ex Chapter 62 (70)	Articles of apparel and clothing accessories, not knitted or crocheted; except for:	Manufacture from yarn (71) , (72)
ex 62 02 , ex 62 04 , ex 62 06 , ex 62 09 and ex 62 11	Women’s, girls’ and babies’ clothing and clothing accessories for babies, embroidered	Manufacture from yarn (73) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (74)
ex 62 10 and ex 62 16	Fire-resistant equipment of fabric covered with foil of aluminised polyester	Manufacture from yarn (75) or Manufacture from uncoated fabric, provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product (76)
6213 and 6214	Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:
	— Embroidered	Manufacture from unbleached single yarn (77) , (78) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (79)
	— Other	Manufacture from unbleached single yarn (80) , (81) or Making up, followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of all the unprinted goods of headings 6213 and 6214 used does not exceed 47,5 % of the ex-works price of the product
6217	Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 :
	— Embroidered	Manufacture from yarn (82) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (83)
	— Fire-resistant equipment of fabric covered with foil of aluminised polyester	Manufacture from yarn (84) or Manufacture from uncoated fabric, provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product (85)
	— Interlinings for collars and cuffs, cut out	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture from yarn (86)
ex Chapter 63	Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for:	Manufacture from materials of any heading, except that of the product
6301 to 6304	Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles:
	— Of felt, of nonwovens	Manufacture from (87): — natural fibres, or — chemical materials or textile pulp
	— Other:
	— Embroidered	Manufacture from unbleached single yarn (88) , (89) or Manufacture from unembroidered fabric (other than knitted or crocheted), provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture from unbleached single yarn (90) , (91)
6305	Sacks and bags, of a kind used for the packing of goods	Manufacture from (92): — natural fibres, — man-made staple fibres, not carded or combed or otherwise processed for spinning, or — chemical materials or textile pulp
6306	Tarpaulins, awnings and sunblinds; tents (including temporary canopies and similar articles); sails for boats, sailboards or landcraft; camping goods:
	— Of nonwovens	Manufacture from (93) , (94): — natural fibres, or — chemical materials or textile pulp
	— Other	Manufacture from unbleached single yarn (95) , (96)
6307	Other made-up articles, including dress patterns	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
6308	Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale	Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set
6401	Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes
6401	— with customs value above 10 EUR	Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406
	— with customs value of 10 EUR or less	Manufacture from materials of any heading, except that of the product and uppers of heading 6406
6402	Other footwear with outer soles and uppers of rubber or plastics
	— with customs value above 8 EUR	Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406
	— with customs value of 8 EUR or less	Manufacture from materials of any heading, except that of the product and uppers of heading 6406
6403	Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather
	— with customs value above 24 EUR	Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406
	— with customs value of 24 EUR or less	Manufacture from materials of any heading, except that of the product and uppers of heading 6406
6404	Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials
	— with customs value above 13 EUR	Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406
	— with customs value of 13 EUR or less	Manufacture from materials of any heading, except that of the product and uppers of heading 6406
6405	Other footwear
	— with customs value above 9 EUR	Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406
	— with customs value of 9 EUR or less	Manufacture from materials of any heading, except that of the product and uppers of heading 6406
6406	Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof	Manufacture from materials of any heading, except that of the product
ex Chapter 65	Headgear and parts thereof; except for:	Manufacture from materials of any heading, except that of the product
6505	Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hair-nets of any material, whether or not lined or trimmed	Manufacture from yarn or textile fibres (97)
ex Chapter 66	Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof; except for:	Manufacture from materials of any heading, except that of the product
6601	Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas)	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 67	Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair	Manufacture from materials of any heading, except that of the product
ex Chapter 68	Articles of stone, plaster, cement, asbestos, mica or similar materials; except for:	Manufacture from materials of any heading, except that of the product
ex 68 02	Marble, travertine and alabaster	Manufacture from materials of any heading, except that of the product and heading 2515
ex 68 03	Articles of slate or of agglomerated slate	Manufacture from worked slate
ex 68 12	Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate	Manufacture from materials of any heading
ex 68 14	Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials	Manufacture from worked mica (including agglomerated or reconstituted mica)
Chapter 69	Ceramic products	Manufacture from materials of any heading, except that of the product
ex Chapter 70	Glass and glassware; except for:	Manufacture from materials of any heading, except that of the product
ex 70 03 , ex 70 04 and ex 70 05	Glass with a non-reflecting layer	Manufacture from materials of heading 7001
7006	Glass of heading 7003 , 7004 or 7005 , bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials:
	— Glass-plate substrates, coated with a dielectric thin film, and of a semiconductor grade in accordance with SEMII-standards (98)	Manufacture from non-coated glass-plate substrate of heading 7006
	— Other	Manufacture from materials of heading 7001
7007	Safety glass, consisting of toughened (tempered) or laminated glass	Manufacture from materials of heading 7001
7008	Multiple-walled insulating units of glass	Manufacture from materials of heading 7001
7009	Glass mirrors, whether or not framed, including rear-view mirrors	Manufacture from materials of heading 7001
7010	Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass	Manufacture from materials of any heading, except that of the product or Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product
7013	Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018 )	Manufacture from materials of any heading, except that of the product or Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product or Hand-decoration (except silk-screen printing) of hand-blown glassware, provided that the total value of the hand-blown glassware used does not exceed 50 % of the ex-works price of the product
ex 70 19	Articles (other than yarn) of glass fibres	Manufacture from: — uncoloured slivers, rovings, yarn or chopped strands, or — glass wool
ex Chapter 71	Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for:	Manufacture from materials of any heading, except that of the product
ex 71 01	Natural or cultured pearls, graded and temporarily strung for convenience of transport	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 71 02 , ex 71 03 and ex 71 04	Worked precious or semi-precious stones (natural, synthetic or reconstructed)	Manufacture from unworked precious or semi-precious stones
7106 , 7108 and 7110	Precious metals:
	— Unwrought	Manufacture from materials of any heading, except those of headings 7106 , 7108 and 7110 or Electrolytic, thermal or chemical separation of precious metals of heading 7106 , 7108 or 7110 or Alloying of precious metals of heading 7106 , 7108 or 7110 with each other or with base metals
	— Semi-manufactured or in powder form	Manufacture from unwrought precious metals
ex 71 07 , ex 71 09 and ex 71 11	Metals clad with precious metals, semi-manufactured	Manufacture from metals clad with precious metals, unwrought
7116	Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed)	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7117	Imitation jewellery	Manufacture from materials of any heading, except that of the product or Manufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 72	Iron and steel; except for:	Manufacture from materials of any heading, except that of the product
7207	Semi-finished products of iron or non-alloy steel	Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 , 7205 or 7206
7208 to 7216	Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel	Manufacture from ingots or other primary forms or semi-finished materials of heading 7206 or 7207
7217	Wire of iron or non-alloy steel	Manufacture from semi-finished materials of heading 7207
ex 7218 91 and ex 7218 99	Semi-finished products	Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 , 7205 or 7218 10
7219 to 7222	Flat-rolled products, bars and rods, angles, shapes and sections of stainless steel	Manufacture from ingots or other primary forms or semi-finished materials of heading 7218
7223	Wire of stainless steel	Manufacture from semi-finished materials of heading 7218
ex 7224 90	Semi-finished products	Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 , 7205 or 7224 10
7225 to 7228	Flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel	Manufacture from ingots or other primary forms or semi-finished materials of heading 7206 , 7207 , 7218 or 7224
7229	Wire of other alloy steel	Manufacture from semi-finished materials of heading 7224
ex Chapter 73	Articles of iron or steel; except for:	Manufacture from materials of any heading, except that of the product
ex 73 01	Sheet piling	Manufacture from materials of heading 7206
7302	Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails	Manufacture from materials of heading 7206
7304 , 7305 and 7306	Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel	Manufacture from materials of heading 7206 , 7207 , 7218 or 7224
ex 73 07	Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts	Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product
7308	Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel	Manufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used
ex 73 15	Skid chain	Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product
ex Chapter 74	Copper and articles thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7401	Copper mattes; cement copper (precipitated copper)	Manufacture from materials of any heading, except that of the product
7402	Unrefined copper; copper anodes for electrolytic refining	Manufacture from materials of any heading, except that of the product
7403	Refined copper and copper alloys, unwrought:
	— Refined copper	Manufacture from materials of any heading, except that of the product
	— Copper alloys and refined copper containing other elements	Manufacture from refined copper, unwrought, or waste and scrap of copper
7404	Copper waste and scrap	Manufacture from materials of any heading, except that of the product
7405	Master alloys of copper	Manufacture from materials of any heading, except that of the product
7413	Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated	Manufacture from materials of any heading, except that of the product.
ex Chapter 75	Nickel and articles thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7501 to 7503	Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrap	Manufacture from materials of any heading, except that of the product
ex Chapter 76	Aluminium and articles thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7601	Unwrought aluminium	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product or Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
7602	Aluminium waste or scrap	Manufacture from materials of any heading, except that of the product
7607 (99)	Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm	Manufacture from materials of any heading, except that of the product and heading 7606
7610 and 7614	Aluminium structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures; Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated	Manufacture from materials of any heading, except that of the product
ex 76 16	Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium	Manufacture: — from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 77	Reserved for possible future use in the HS
ex Chapter 78	Lead and articles thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7801	Unwrought lead:
	— Refined lead	Manufacture from “bullion” or “work” lead
	— Other	Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7802 may not be used
7802	Lead waste and scrap	Manufacture from materials of any heading, except that of the product
ex Chapter 79	Zinc and articles thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7901	Unwrought zinc	Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7902 may not be used
7902	Zinc waste and scrap	Manufacture from materials of any heading, except that of the product
ex Chapter 80	Tin and articles thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8001	Unwrought tin	Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 8002 may not be used
8002 and 8007	Tin waste and scrap; other articles of tin	Manufacture from materials of any heading, except that of the product
Chapter 81	Other base metals; cermets; articles thereof:
	— Other base metals, wrought; articles thereof	Manufacture in which the value of all the materials of the same heading as the product used does not exceed 50 % of the ex-works price of the product
	— Other	Manufacture from materials of any heading, except that of the product
ex Chapter 82	Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for:	Manufacture from materials of any heading, except that of the product
8206	Tools of two or more of the headings 8202 to 8205 , put up in sets for retail sale	Manufacture from materials of any heading, except those of headings 8202 to 8205 . However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 % of the ex-works price of the set
8207	Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8208	Knives and cutting blades, for machines or for mechanical appliances	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 82 11	Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208	Manufacture from materials of any heading, except that of the product. However, knife blades and handles of base metal may be used
8214	Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files)	Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used
8215	Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware	Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used
ex Chapter 83	Miscellaneous articles of base metal; except for:	Manufacture from materials of any heading, except that of the product
ex 83 02	Other mountings, fittings and similar articles suitable for buildings, and automatic door closers	Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product
ex 83 06	Statuettes and other ornaments, of base metal	Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product
ex Chapter 84	Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 84 01	Nuclear fuel elements	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8402	Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8403 and ex 84 04	Central heating boilers other than those of heading 8402 and auxiliary plant for central heating boilers	Manufacture from materials of any heading, except those of headings 8403 and 8404	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8406	Steam turbines and other vapour turbines	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8407	Spark-ignition reciprocating or rotary internal combustion piston engines	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8408	Compression-ignition internal combustion piston engines (diesel or semi-diesel engines)	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8409	Parts suitable for use solely or principally with the engines of heading 8407 or 8408	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8411	Turbo-jets, turbo-propellers and other gas turbines	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8412	Other engines and motors	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 84 13	Rotary positive displacement pumps	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 84 14	Industrial fans, blowers and the like	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8415	Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8418	Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 8415	Manufacture from materials of any heading, except that of the product. However materials of the same heading as the product may be used provided that their total value does not exceed 20 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 84 19	Machines for wood, paper pulp, paper and paperboard industries	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8420	Calendering or other rolling machines, other than for metals or glass, and cylinders therefor	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8423	Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8424	Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8425 to 8428	Lifting, handling, loading or unloading machinery	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8429	Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:
	— Road rollers	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8430	Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 84 31	Parts suitable for use solely or principally with road rollers	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8439	Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8441	Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 84 43	Printers, for office machines (for example automatic data processing machines, word-processing machines, etc.)	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8444 to 8447	Machines of these headings for use in the textile industry	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 84 48	Auxiliary machinery for use with machines of headings 8444 and 8445	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8452	Sewing machines, other than book-sewing machines of heading 8440 ; furniture, bases and covers specially designed for sewing machines; sewing machine needles:
	— Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, — the value of all the non-originating materials used in assembling the head (without motor) does not exceed the value of all the originating materials used, and — the thread-tension, crochet and zigzag mechanisms used are originating
	— Other	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8456 to 8466	Machine-tools and machines and their parts and accessories of headings 8456 to 8466 , except for:	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 84 56	Water-jet cutting machines	Manufacture: — from materials of any heading, except that of the product and heading 8466 , and — in which the value of all the materials used does not exceed 40% of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 84 66	Parts of water-jet cutting machines	Manufacture: — from materials of any heading, except that of the product and heading 8456 , and — in which the value of all the materials used does not exceed 40% of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8470 to 8472	Office machines (for example, typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines)	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8480	Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8482	Ball or roller bearings	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8484	Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 84 85	Machines for additive manufacturing: — By paper pulp, paper, or paperboard deposit	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
	— By metal deposit — By wood, cork, bone, hard rubber, hard plastics or similar hard materials deposit — Parts and accessories of machines for additive manufacturing by metal, metal carbides or cermets deposit	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 84 86	— Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes and parts and accessories thereof — Machine tools (including presses) for working metal by bending, folding, straightening, flattening, and parts and accessories thereof — Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass and parts and accessories thereof — Marking-out instruments which are pattern generating apparatus of a kind used for producing masks or reticles from photoresist coated substrates; parts and accessories thereof	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Moulds, injection or compression types	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
	— Lifting, handing, loading or unloading machinery	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8487	Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this Chapter	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 85	Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8501	Electric motors and generators (excluding generating sets)	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8503 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8502	Electric generating sets and rotary converters	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of headings 8501 and 8503 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 85 04	Power supply units for automatic data-processing machines	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8506	Primary cells and primary batteries	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8507	Electric accumulators, including separators therefore, whether or not rectangular (including square)	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8510	Shavers, hair clippers and hair-removing appliances, with self-contained electric motor	Manufacture from materials of any heading, except that of the product. However, other materials of the same heading may be used, provided that their total value does not exceed 20 % of the ex works price of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8516	Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers hair curlers, curling tong heaters) and hand-dryers; electric smoothing irons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading 8545	Manufacture from materials of any heading, except that of the product. However, other materials of the same heading may be used, provided that their total value does not exceed 20 % of the ex works price of the product.	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 85 17	Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wireless network (such as a local or wide area network), other than transmission or reception apparatus of headings 8443 , 8525 , 8527 or 8528	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 85 18	Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; audio-frequency electric amplifiers; electric sound amplifier sets	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8519	Sound recording and sound reproducing apparatus	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8521	Video recording or reproducing apparatus, whether or not incorporating a video tuner	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8522	Parts and accessories suitable for use solely or principally with the apparatus of headings 8519 or 8521	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8523	— Unrecorded discs, tapes, solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Recorded discs, tapes solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8523 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
	— Matrices and masters for the production of discs, but excluding products of Chapter 37	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8523 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
	— Proximity cards and “smart cards” with two or more electronic integrated circuits	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
	— “Smart cards” with one electronic integrated circuit	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product or The operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a country other than those specified in Article 3	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8524	Flat panel display modules, whether or not incorporating touch-sensitive screen	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8525	Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8526	Radar apparatus, radio navigational aid apparatus and radio remote control apparatus	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8527	Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8528	— Monitors and projectors, not incorporating television reception apparatus, of a kind solely or principally used in an automatic data-processing system of heading 8471	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio broadcast receivers or sound or video recording or reproducing apparatus	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8529	Parts suitable for use solely or principally with the apparatus of headings 8524 to 8528	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8531	Electric sound or visual signalling apparatus (for example, bells, sirens, indicator panels, burglar or fire alarms), other than those of heading 8512 or 8530	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8535	Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes), for a voltage exceeding 1 000 V	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8536	— Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits for a voltage not exceeding 1 000 V	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Connectors for optical fibres, optical fibre bundles or cables:
	— of plastics	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
	— of ceramics	Manufacture from materials of any heading, except that of the product
	— of copper	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8537	Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 85 39	Light-emitting diode (LED) light sources: — Chandeliers and other electric ceiling or wall lighting fittings, excluding those of a kind used for lighting public open spaces or thoroughfares — Electric table, desk, bedside or floor-standing lamps — Lighting sets of a kind used for Christmas trees — Other electric lamps and lighting fittings — Parts	Manufacture from materials of any heading except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8541.51 to 8541.59	Semiconductor-based transducers and other semiconductor devices	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 85 42	Electronic integrated circuits:
	— Monolithic integrated circuits	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product or The operation of diffusion, in which integrated circuits are formed on a semi-conductor substrate by the selective introduction of an appropriate dopant, whether or not assembled and/or tested in a country other than those specified in Article 3	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
	— Multichips which are parts of machinery or apparatus, not specified or included elsewhere in this Chapter	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Others	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8544 (100)	Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8545	Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8546	Electrical insulators of any material	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8547	Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8548	Electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter:
	— Electronic microassemblies	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
	— Others	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8549	Electrical and electronic waste and scrap	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 86	Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds; except for:	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8608	Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex Chapter 87	Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for:	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8709	Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8710	Tanks and other armoured fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8711	Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 87 12	Bicycles without ball bearings	Manufacture from materials of any heading, except those of heading 8714	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8715	Baby carriages and parts thereof	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8716	Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex Chapter 88	Aircraft, spacecraft, and parts thereof; except for:	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 88 04	Rotochutes	Manufacture from materials of any heading, including other materials of heading 8804	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8805	Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 88 06	Unmanned aircraft with television cameras, digital cameras or video camera recorders	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Chapter 89	Ships, boats and floating structures	Manufacture from materials of any heading, except that of the product. However, hulls of heading 8906 may not be used	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 90	Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for:	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9001	Optical fibres and optical fibre bundles; optical fibre cables other than those of heading 8544 ; sheets and plates of polarizing material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9002	Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9004	Spectacles, goggles and the like, corrective, protective or other	Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
ex 90 05	Binoculars, monoculars, other optical telescopes, and mountings therefor, except for astronomical refracting telescopes and mountings therefor	Manufacture: — from materials of any heading, except that of the product, — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product; and — in which the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 90 06	Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs	Manufacture: — from materials of any heading, except that of the product, — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — in which the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9007	Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus	Manufacture: — from materials of any heading, except that of the product, — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — in which the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9011	Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection	Manufacture: — from materials of any heading, except that of the product, — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — in which the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 90 14	Other navigational instruments and appliances	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9015	Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9016	Balances of a sensitivity of 5 cg or better, with or without weights	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9017	Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this chapter	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9018	Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments:
	— Dentists’ chairs incorporating dental appliances or dentists’ spittoons	Manufacture from materials of any heading, including other materials of heading 9018	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
9019	Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
9020	Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 90 21	Materials for orthopaedic or fracture appliances and for dental fitting: — Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305 ) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper	Manufacture from materials of any heading, except that of the product
	— Threaded articles and non-threaded articles of iron or steel, excluding coach screws, wood screws, screw hooks and screw rings, spring washers and other lock washers, rivets	Manufacture from materials of any heading, except that of the product
	— Articles of titanium	Manufacture in which the value of all the materials of the same heading as the product used does not exceed 50 % of the ex-works price of the product.
9024	Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics)	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9025	Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9026	Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014 , 9015 , 9028 or 9032	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9027	Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9028	Gas, liquid or electricity supply or production meters, including calibrating meters therefor:
	— Parts and accessories	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9029	Revolution counters, production counters, taximeters, mileometers, pedometers and the like; speed indicators and tachometers, other than those of heading 9014 or 9015 ; stroboscopes	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9030	Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028 ; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionizing radiations	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9031	Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9032	Automatic regulating or controlling instruments and apparatus	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9033	Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of Chapter 90	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 91	Clocks and watches and parts thereof; except for:	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9105	Other clocks	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9109	Clock movements, complete and assembled	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — the value of all the non-originating materials used does not exceed the value of all the originating materials used	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9110	Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements	Manufacture in which: — the value of all the materials used does not exceed 40 % of the ex-works price of the product, and — within the above limit, the value of all the materials of heading 9114 used does not exceed 10 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9111	Watch cases and parts thereof	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9112	Clock cases and cases of a similar type for other goods of this chapter, and parts thereof	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 40 % of the ex-works price of the product	Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9113	Watch straps, watch bands and watch bracelets, and parts thereof:
	— Of base metal, whether or not gold- or silver-plated, or of metal clad with precious metal	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
	— Other	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 92	Musical instruments; parts and accessories of such articles	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Chapter 93	Arms and ammunition; parts and accessories thereof	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 94	Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; luminaires and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings; except for:	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 94 01 and ex 94 03	Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or less	Manufacture from materials of any heading, except that of the product or Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403 , provided that: — the value of the cloth does not exceed 25 % of the ex-works price of the product, and — all the other materials used are originating and are classified in a heading other than heading 9401 or 9403	Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9405	Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included	Manufacture from materials of any heading except that of the product	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
9406	Prefabricated buildings	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 95	Toys, games and sports requisites; parts and accessories thereof; except for:	Manufacture from materials of any heading, except that of the product
ex 95 03	Other toys; reduced-size (“scale”) models and similar recreational models, working or not; puzzles of all kinds	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 95 06	Golf clubs and parts thereof	Manufacture from materials of any heading, except that of the product. However, roughly-shaped blocks for making golf-club heads may be used
ex Chapter 96	Miscellaneous manufactured articles; except for:	Manufacture from materials of any heading, except that of the product
ex 96 01 and ex 96 02	Articles of animal, vegetable or mineral carving materials	Manufacture from “worked” carving materials of the same heading as the product
ex 96 03	Brooms and brushes (except for besoms and the like and brushes made from marten or squirrel hair), hand-operated mechanical floor sweepers, not motorized, paint pads and rollers, squeegees and mops	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
9605	Travel sets for personal toilet, sewing or shoe or clothes cleaning	Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set
9606	Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanks	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
9608	Ball-point pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609	Manufacture from materials of any heading, except that of the product. However, materials of subheading 9608 91 or 9608 99 may be used
9609	Pencils (other than pencils of heading 9608 ), crayons, pencils leads pastels, drawing charcoals, writing or drawing chalks and tailors’ chalks	Manufacture from materials of any heading
9612	Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes	Manufacture: — from materials of any heading, except that of the product, and — in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 96 13	Lighters with piezo-igniter	Manufacture in which the value of all the materials of heading 9613 used does not exceed 30 % of the ex-works price of the product
ex 96 14	Smoking pipes and pipe bowls	Manufacture from roughly shaped blocks
9619	Sanitary towels (pads) and tampons, napkins (diapers), napkin liners and similar articles, of any material	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
9620	Monopods, bipods, tripods and similar articles	Manufacture from materials of any heading, except that of the product	Manufacture in which the value of all the materials used does not exceed 50% of the ex-works price of the product
Chapter 97	Works of art, collectors’ pieces and antiques	Manufacture from materials of any heading, except that of the product
(1) See introductory Note 8. (2) See introductory Note 8. (3) See introductory Note 8. (4) See introductory Note 8. (5) See introductory Note 8. (6) See introductory Note 8. (7) See introductory Note 8. (8) See introductory Note 8. (9) See Note 1 in Appendix 2A for heading ex 16 04 . (10) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (11) For the special conditions relating to “specific processes”, see Introductory Note 7.2. (12) For the special conditions relating to “specific processes”, see Introductory Note 7.2. (13) For the special conditions relating to “specific processes”, see Introductory Note 7.2. (14) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (15) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (16) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (17) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (18) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (19) For special conditions relating to products made of a mixture of textile materials, see introductory Note 5. (20) Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided that they are not classified in another heading in Chapter 32. (21) A “group” is regarded as any part of the heading separated from the rest by a semicolon. (22) For the special conditions relating to “specific processes”, see Introductory Notes 7.1 and 7.3. (23) In the case of the products composed of materials classified within both headings 3901 to 3906 , on the one hand, and within headings 3907 to 3911 , on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. (24) In the case of the products composed of materials classified within both headings 3901 to 3906 , on the one hand, and within headings 3907 to 3911 , on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. (25) In the case of the products composed of materials classified within both headings 3901 to 3906 , on the one hand, and within headings 3907 to 3911 , on the other hand, this restriction only applies to that group of materials which predominates by weight in the product. (26) See Note 2 in Appendix 2A for heading 3920 . (27) See Note 3 in Appendix 2 A for headings 4810 , ex 48 11 , 4816 , 4817 , ex 48 18 , ex 48 19 , ex 48 20 and ex 48 23 . (28) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (29) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (30) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (31) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (32) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (33) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (34) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (35) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (36) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (37) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (38) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (39) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (40) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (41) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (42) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (43) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (44) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (45) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (46) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (47) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (48) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (49) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (50) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (51) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (52) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (53) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (54) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (55) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (56) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (57) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (58) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (59) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (60) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (61) The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery. (62) The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery. (63) The use of this material is restricted to the manufacture of woven fabrics of a kind used in paper-making machinery. (64) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (65) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (66) See Note 4 in Appendix 2A for specific subheadings of Chapter 61. (67) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (68) See Introductory Note 6. (69) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (70) See Note 4 in Appendix 2A for specific subheadings of Chapter 62. (71) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (72) See Introductory Note 6. (73) See Introductory Note 6. (74) See Introductory Note 6. (75) See Introductory Note 6. (76) See Introductory Note 6. (77) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (78) See Introductory Note 6. (79) See Introductory Note 6. (80) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (81) See Introductory Note 6. (82) See Introductory Note 6. (83) See Introductory Note 6. (84) See Introductory Note 6. (85) See Introductory Note 6. (86) See Introductory Note 6. (87) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (88) See Introductory Note 6. (89) For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6. (90) See Introductory Note 6. (91) For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6. (92) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (93) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (94) See Introductory Note 6. (95) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5. (96) See Introductory Note 6. (97) See Introductory Note 6. (98) SEMII – Semiconductor Equipment and Materials Institute Incorporated. (99) See Note 5 in Appendix 2A for subheading 7607.20. (100) See Note 6 in Appendix 2A for subheadings 8544 30 , 8544 42 , 8544 49 , and 8544 60 .

▼B

Appendix 2 A

ADDENDUM TO THE LIST OF WORKING AND PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER THAT THE PRODUCT MANUFACTURED CAN OBTAIN ORIGINATING STATUS

Common provisions

1. For the products described below, the following rules of origin may also apply instead of the rules set out in Appendix 2 (List of Working or Processing required to be carried out on Non-Originating Materials in order that the Product Manufactured can Obtain Originating Status) for determining if a product is originating from Central America.

2. When a product is covered by a rule of origin that is subject to quotas, the proof of origin for that product shall contain the following statement: "Product originating in accordance with Appendix 2A of Annex II (Concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Cooperation)".

3. The Republics of the CA Party shall agree on a distribution of the regional quotas set forth in Notes 1, 2 and the relevant quota in Note 6 of this Appendix and, based on it, each Republic of the CA Party shall issue the corresponding export certificates.

4. The quotas established in Notes 4, 5 and the relevant quota in Note 6 shall be managed by the European Commission in accordance with the distribution by country established in this Appendix and with the internal allocation made by each Republic of the CA Party ( 63 ).

5. Importations under quotas set forth in this Appendix shall be subject to the presentation of an export certificate issued in accordance with the provisions of paragraphs 3 and 4 by the competent authority of the relevant Republic of the CA Party.

6. The modalities for the implementation of the provisions of this Appendix shall be defined jointly by the Parties. The European Commission shall adopt the necessary measures to ensure the respect of these provisions.

Note 1

1. For products of heading ex 1604 (Tunas, skipjack and bonito (Sarda spp.)) exported from Central America to the European Union, materials of Chapter 03 originating from Chile or Mexico in accordance with rules of origin applicable as if said materials were directly exported to the European Union, may be used for a period of three years after the entry into force of this Agreement. Six months before the expiry of this three-year period, the Parties shall hold consultations to examine the readiness of the administrative procedures necessary to apply the cumulation referred to in Article 3, paragraph 7, of Annex II (Concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Cooperation) of Part IV of this Agreement.

Additionally, for these products exported from Central America to the European Union the value set in Article 5, paragraph 2(a) of Annex II shall not exceed 15 per cent of the ex works price of the product.

2. For products of heading ex 1604 (tuna loins) the following rule shall confer origin to goods exported from Central America to the European Union within the annual quota of 4 000 metric tones:

Manufacture from materials of Chapter 03

Note 2

For products of heading 3920 (Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials) the following rule shall confer origin to goods exported from Central America to the European Union within the annual quota of 5 000 metric tones:

Manufacture from materials of any heading

Note 3

For products of headings 4810 , ex 4811 , 4816 , 4817 , ex 4818 , ex 4819 , ex 4820 and ex 4823 the following rules shall confer origin in the case of any increase above 0 per cent of the European Union's WTO bound tariffs applicable to these products:

HS heading	Description of product	Working or processing carried out on non-originating materials that confers originating status
(1)	(2)	(3) or (4)
4810	Paper and paperboard, coated on one or both sides with kaolin (China clay) or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or rectangular (including square) sheets, of any size	Manufacture from materials of any heading
ex 4811	Paper and paperboard, ruled, lined or squared only	Manufacture from materials of any heading, except that of the product
4816	Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading 4809 ), duplicator stencils and offset plates, of paper, whether or not put up in boxes	Manufacture from materials of any heading, except that of the product
4817	Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery	Manufacture from materials of any heading, except that of the product
ex 4818	Toilet paper	Manufacture from materials of any heading, except that of the product
ex 4819	Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres	Manufacture from materials of any heading, except that of the product
ex 4820	Letter pads	Manufacture from materials of any heading, except that of the product
ex 4823	Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape	Manufacture from materials of any heading, except that of the product

▼M5

NOTE 4

1. The following rules shall confer origin for products of Chapters 61 and 62 within the following annual quotas per country:

(a)

For products of heading 6115 (Panty hose, tights, stockings, socks and other hosiery, including graduated compression hosiery (for example, stockings for varicose veins) and footwear without applied soles, knitted or crocheted:

Manufacture from materials of any heading except that of the product

This rule shall confer origin to goods exported from Central America to the European Union within the following annual quotas per country:

Country	Units (pairs)
Costa Rica	4 000 000
El Salvador	2 500 000
Honduras	7 000 000
Panama	1 500 000

(b)

For products of Chapters 61 and 62 specified in this sub-paragraph and in sub-paragraphs (c) and (d):

Manufacture from materials of any heading except that of the product

This rule shall confer origin to goods exported from Central America to the European Union within the following annual quotas per country:

Country	Units
	Year 1 (entry into force)	Year 2	Year 3	Year 4	Year 5	From year 6
Costa Rica	7 000 000	7 630 000	8 260 000	8 890 000	9 520 000	10 150 000
El Salvador	9 000 000	10 157 500	11 315 000	12 472 500	13 630 000	14 787 500
Guatemala	7 000 000	7 630 000	8 260 000	8 890 000	9 520 000	10 150 000
Honduras	54 750 000	59 130 000	63 510 000	67 890 000	72 270 000	76 650 000
Nicaragua	8 750 000	9 537 500	10 325 000	11 112 500	11 900 000	12 687 500
Panama	3 500 000	3 815 000	4 130 000	4 445 000	4 760 000	5 075 000
Total	90 000 000	97 900 000	105 800 000	113 700 000	121 600 000	129 500 000

(c)

The quantities indicated under paragraph 1(b) above will be distributed as stated in the following tables below for Costa Rica, Guatemala, Honduras and Panama:

COSTA RICA
HS	Year 1	Year 2	Year 3	Year 4	Year 5	From year 6
Total Units per year	7 000 000	7 630 000	8 260 000	8 890 000	9 520 000	10 150 000
6103 43	200 000	218 000	236 000	254 000	272 000	290 000
6105 10	600 000	654 000	708 000	762 000	816 000	870 000
6105 90	120 000	130 800	141 600	152 400	163 200	174 000
6106 10	450 000	490 500	531 000	571 500	612 000	652 500
6107 11	235 000	256 150	277 300	298 450	319 600	340 750
6107 19	70 000	76 300	82 600	88 900	95 200	101 500
6108 21	47 000	51 230	55 460	59 690	63 920	68 150
6108 22	25 000	27 250	29 500	31 750	34 000	36 250
6109 10	1 860 000	2 027 400	2 194 800	2 362 200	2 529 600	2 697 000
6111 20	200 000	218 000	236 000	254 000	272 000	290 000
6112 41	50 000	54 500	59 000	63 500	68 000	72 500
6114 30	30 000	32 700	35 400	38 100	40 800	43 500
6117 80	20 000	21 800	23 600	25 400	27 200	29 000
ex 6201 40 (1)	8 000	8 720	9 440	10 160	10 880	11 600
ex 6202 40 (2)	15 000	16 350	17 700	19 050	20 400	21 750
6203 11	350 000	381 500	413 000	444 500	476 000	507 500
6203 12	350 000	381 500	413 000	444 500	476 000	507 500
6203 31	175 000	190 750	206 500	222 250	238 000	253 750
6203 33	265 000	288 850	312 700	336 550	360 400	384 250
6203 41	500 000	545 000	590 000	635 000	680 000	725 000
6203 43	520 000	566 800	613 600	660 400	707 200	754 000
6204 31	175 000	190 750	206 500	222 250	238 000	253 750
6204 33	165 000	179 850	194 700	209 550	224 400	239 250
6204 53	30 000	32 700	35 400	38 100	40 800	43 500
6204 61	70 000	76 300	82 600	88 900	95 200	101 500
6204 63	280 000	305 200	330 400	355 600	380 800	406 000
6211 33	45 000	49 050	53 100	57 150	61 200	65 250
6211 43	45 000	49 050	53 100	57 150	61 200	65 250
6212 10	100 000	109 000	118 000	127 000	136 000	145 000
(1) Ex 6201 40 : Overcoats, raincoats, car coats, capes, cloaks and similar articles of man made fibres (2) Ex 6202 40 : Overcoats, raincoats, car coats, capes, cloaks and similar articles of man made fibres

GUATEMALA
HS	Year 1	Year 2	Year 3	Year 4	Year 5	From year 6
Total Units per year	7 000 000	7 630 000	8 260 000	8 890 000	9 520 000	10 150 000
6104 62	1 050 000	1 144 500	1 239 000	1 333 500	1 428 000	1 522 500
6105 20	3 500 000	3 815 000	4 130 000	4 445 000	4 760 000	5 075 000
6203 42	1 050 000	1 144 500	1 239 000	1 333 500	1 428 000	1 522 500
6203 43	700 000	763 000	826 000	889 000	952 000	1 015 000
6204 62	700 000	763 000	826 000	889 000	952 000	1 015 000

HONDURAS
HS	Year 1	Year 2	Year 3	Year 4	Year 5	From year 6
Total Units per year	54 750 000	59 130 000	63 510 000	67 890 000	72 270 000	76 650 000
6205 20	11 000 000	11 880 000	12 760 000	13 640 000	14 520 000	15 400 000
6205 30	13 750 000	14 850 000	15 950 000	17 050 000	18 150 000	19 250 000
6205 90	1 000 000	1 080 000	1 160 000	1 240 000	1 320 000	1 400 000
6206 30	10 000 000	10 800 000	11 600 000	12 400 000	13 200 000	14 000 000
6206 40	13 000 000	14 040 000	15 080 000	16 120 000	17 160 000	18 200 000
6206 90	1 000 000	1 080 000	1 160 000	1 240 000	1 320 000	1 400 000
6212 10	5 000 000	5 400 000	5 800 000	6 200 000	6 600 000	7 000 000

PANAMA
HS	Year 1	Year 2	Year 3	Year 4	Year 5	From year 6
Total Units per year	3 500 000	3 815 000	4 130 000	4 445 000	4 760 000	5 075 000
6103 22	40 000	43 600	47 200	50 800	54 400	58 000
6104 22	40 000	43 600	47 200	50 800	54 400	58 000
6106 10	140 000	152 600	165 200	177 800	190 400	203 000
6108 21	770 000	839 300	908 600	977 900	1 047 200	1 116 500
6109 10	1 100 000	1 199 000	1 298 000	1 397 000	1 496 000	1 595 000
6110 20	800 000	872 000	944 000	1 016 000	1 088 000	1 160 000
6111 20	50 000	54 500	59 000	63 500	68 000	72 500
6203 22	10 000	10 900	11 800	12 700	13 600	14 500
6203 42	200 000	218 000	236 000	254 000	272 000	290 000
6203 43	100 000	109 000	118 000	127 000	136 000	145 000
6205 20	100 000	109 000	118 000	127 000	136 000	145 000
6206 30	100 000	109 000	118 000	127 000	136 000	145 000
6209 20	50 000	54 500	59 000	63 500	68 000	72 500

At the request of a Republic of the CA Party and when an agreement is reached with the EU Party, the yearly quantities assigned to each subheading of Chapters 61 and 62 indicated may be modified.

(d)

The quantities indicated under paragraph 1(b) above will be distributed for El Salvador and Nicaragua as stated in the following tables below. El Salvador and Nicaragua may distribute these quantities between the subheadings indicated in the following tables within the caps indicated therein for each individual subheading.

EL SALVADOR
HS	Year 1	Year 2	Year 3	Year 4	Year 5	From year 6
Total Units per year (global quota per year, caps per subheading)	9 000 000	10 157 500	11 315 000	12 472 500	13 630 000	14 787 500
6102 20	495 000	534 600	574 200	613 800	653 400	693 000
6102 30	770 000	831 600	893 200	954 800	1 016 400	1 078 000
6104 22	220 000	237 600	255 200	272 800	290 400	308 000
6104 42	220 000	237 600	255 200	272 800	290 400	308 000
6104 43	440 000	475 200	510 400	545 600	580 800	616 000
6104 44	220 000	237 600	255 200	272 800	290 400	308 000
6104 62	990 000	1 069 200	1 148 400	1 227 600	1 306 800	1 386 000
6104 63	330 000	356 400	382 800	409 200	435 600	462 000
6202 30	440 000	475 200	510 400	545 600	580 800	616 000
6202 40	880 000	950 400	1 020 800	1 091 200	1 161 600	1 232 000
6203 42	550 000	594 000	638 000	682 000	726 000	770 000
6205 20	825 000	891 000	957 000	1 023 000	1 089 000	1 155 000
6205 30	1 100 000	1 188 000	1 276 000	1 364 000	1 452 000	1 540 000
6207 11	550 000	594 000	638 000	682 000	726 000	770 000
6207 19	440 000	475 200	510 400	545 600	580 800	616 000
6207 21	800 000	864 000	928 000	992 000	1 056 000	1 120 000
6207 22	550 000	594 000	638 000	682 000	726 000	770 000
6207 91	385 000	415 800	446 600	477 400	508 200	539 000
6207 99	220 000	237 600	255 200	272 800	290 400	308 000
6208 21	220 000	237 600	255 200	272 800	290 400	308 000
6208 22	440 000	475 200	510 400	545 600	580 800	616 000
6208 91	660 000	712 800	765 600	818 400	871 200	924 000
6208 92	275 000	297 000	319 000	341 000	363 000	385 000
6212 10	990 000	1 069 200	1 148 400	1 227 600	1 306 800	1 386 000

NICARAGUA
HS	Year 1	Year 2	Year 3	Year 4	Year 5	From year 6
Total Units per year (global quota per year, caps per subheading)	8 750 000	9 537 500	10 325 000	11 112 500	11 900 000	12 687 500
6104 23	50 000	54 000	58 000	62 000	66 000	70 000
6104 42	195 000	210 600	226 200	241 800	257 400	273 000
6104 43	75 000	81 000	87 000	93 000	99 000	105 000
6104 53	30 000	32 400	34 800	37 200	39 600	42 000
6104 63	300 000	324 000	348 000	372 000	396 000	420 000
6105 10	770 000	831 600	893 200	954 800	1 016 400	1 078 000
6106 10	590 000	637 200	684 400	731 600	778 800	826 000
6106 20	400 000	432 000	464 000	496 000	528 000	560 000
6107 11	3 590 000	3 877 200	4 164 400	4 451 600	4 738 800	5 026 000
6107 12	530 000	572 400	614 800	657 200	699 600	742 000
6108 22	2 780 000	3 002 400	3 224 800	3 447 200	3 669 600	3 892 000
6109 10	3 890 000	4 201 200	4 512 400	4 823 600	5 134 800	5 446 000
6109 90	1 000 000	1 080 000	1 160 000	1 240 000	1 320 000	1 400 000
6203 23	50 000	54 000	58 000	62 000	66 000	70 000
6203 42	1 000 000	1 080 000	1 160 000	1 240 000	1 320 000	1 400 000
6203 43	470 000	507 600	545 200	582 800	620 400	658 000
6204 43	245 000	264 600	284 200	303 800	323 400	343 000
6204 44	140 000	151 200	162 400	173 600	184 800	196 000
6204 62	1 370 000	1 479 600	1 589 200	1 698 800	1 808 400	1 918 000
6204 63	350 000	378 000	406 000	434 000	462 000	490 000
6205 20	330 000	356 400	382 800	409 200	435 600	462 000
6207 11	365 000	394 200	423 400	452 600	481 800	511 000
6207 19	55 000	59 400	63 800	68 200	72 600	77 000
6207 21	95 000	102 600	110 200	117 800	125 400	133 000
6207 22	20 000	21 600	23 200	24 800	26 400	28 000
6207 91	160 000	172 800	185 600	198 400	211 200	224 000
6208 21	100 000	108 000	116 000	124 000	132 000	140 000
6208 22	90 000	97 200	104 400	111 600	118 800	126 000
6208 91	10 000	10 800	11 600	12 400	13 200	14 000
6208 92	10 000	10 800	11 600	12 400	13 200	14 000
6212 10	30 000	32 400	34 800	37 200	39 600	42 000
6212 20	500 000	540 000	580 000	620 000	660 000	700 000
6212 30	20 000	21 600	23 200	24 800	26 400	28 000
6212 90	1 000 000	1 080 000	1 160 000	1 240 000	1 320 000	1 400 000

2. After the period of five years referred to in paragraph 1(b), the Parties shall review the system of quotas, with respect in particular to the quantities and their distribution. The Parties shall assess the feasibility of agreeing on an annual increase rate for subsequent years as well as its distribution between the products of Chapters 61 and 62.

▼B

Note 5

For products of sub-heading 7607 20 (Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm, backed), the following rule shall confer origin to goods exported from El Salvador to the EU Party within an annual quota of 1 000 metric tones:

Manufacture from materials of any heading

Note 6

For products of headings 8544 30 (Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships); 8544 42 (Other electric conductors, for a voltage not exceeding 1 000 V: Fitted with connectors); 8544 49 (Other electric conductors, for a voltage not exceeding 1 000 V: Other) and 8544 60 (Other electric conductors, for a voltage exceeding 1 000 V) the following rule shall confer origin to goods exported from Central America to the EU Party within the annual quota of 20 000 metric tones:

Manufacture from materials of any heading.

This rule shall confer origin to goods exported from Central America to the European Union within the following annual quotas:

Country	Metric tones
Honduras	8 000
Central America	12 000

Appendix 3

SPECIMENS OF MOVEMENT CERTIFICATE EUR.1 AND APPLICATION FOR A MOVEMENT CERTIFICATE EUR.1

Printing instructions

1. Each form shall measure 210 × 297 mm; a tolerance of up to minus 5 mm or plus 8 mm in length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m2. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.

2. The competent public authorities of the Member States of the European Union and of the Republics of the CA Party may reserve the right to print the forms themselves or may have them printed by approved printers. In the latter case, each form shall include a reference to such approval. Each form shall bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified.

NOTES

1. The certificate shall not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration shall be initialled by the person who completed the certificate and endorsed by the competent public authorities or customs authorities of the issuing country or territory.

2. No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space shall be struck through in such a manner as to make any later additions impossible.

3. Goods shall be described in accordance with commercial practice and with sufficient detail to enable them to be identified.

▼M3

Appendix 4

INVOICE DECLARATION

Specific requirements as for the making out of an invoice declaration

An invoice declaration, the text of which is set out below, shall be made out using one of the linguistic versions set out there and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink in printed characters. The invoice declaration shall be drawn up in accordance with the respective footnotes. The footnotes do not have to be reproduced.

Bulgarian version

Износителят на продуктите, обхванати от този документ (разрешение № … от митница или от друг компетентен държавен орган (64) ) декларира, че освен където ясно е отбелязано друго, тези продукти са с … (65) преференциален произход.

Spanish version

El exportador de los productos incluidos en el presente documento (autorización aduanera o de la autoridad pública competente n° … (64) ) declara que, salvo indicación en sentido contrario, estos productos gozan de un origen preferencial … (65)

Czech versión

Vývozce výrobků uvedených v tomto dokumentu (číslo povolení celního nebo příslušného vládního orgánu … (64) ) prohlašuje, že kromě zřetelně označených, mají tyto výrobky preferenční původ v … (65) .

Danish version

Eksportøren af varer, der er omfattet af nærværende dokument, (toldmyndighedernes eller den kompetente offentlige myndigheds tilladelse nr. … (64) ) erklærer, at varerne, medmindre andet tydeligt er angivet, har præferenceoprindelse i … (65) .

German version

Der Ausführer (Ermächtigter Ausführer; Bewilligung der Zollbehörde oder der zuständigen Regierungsbehörde Nr. … (64) ) der Waren, auf die sich dieses Handelspapier bezieht, erklärt, dass diese Waren, soweit nicht anders angegeben, präferenzbegünstigte Ursprungswaren … (65) sind.

Estonian version

Käesoleva dokumendiga hõlmatud toodete eksportija (tolliameti või pädeva valitsusasutuse luba nr. … (64) ) deklareerib, et need tooted on … (65) sooduspäritoluga, välja arvatud juhul kui on selgelt näidatud teisiti.

Greek version

Ο εξαγωγέας των προϊόντων που καλύπτονται από το παρόν έγγραφο (άδεια τελωνείου ή της καθύλην αρμόδιας αρχής, υπ’ αριθ. … (64) ) δηλώνει ότι, εκτός εάν δηλώνεται σαφώς άλλως, τα προϊόντα αυτά είναι προτιμησιακής καταγωγής … (65) .

English version

The exporter of the products covered by this document (customs or competent public authority authorisation No ... (64) ) declares that, except where otherwise clearly indicated, these products are of ... preferential origin (65) .

French version

L’exportateur des produits couverts par le présent document (autorisation douanière ou de l’autorité publique compétente n° … (64) ) déclare que, sauf indication claire du contraire, ces produits ont l’origine préférentielle … (65)

Croatian version

Izvoznik proizvoda obuhvaćenih ovom ispravom (carinsko ovlaštenje br. … (64) ) izjavljuje da su, osim ako je drukčije izričito navedeno, ovi proizvodi … (65) preferencijalnog podrijetla.

Italian version

L’esportatore delle merci contemplate nel presente documento (autorizzazione doganale o dell’autorità pubblica competente n. … (64) ) dichiara che, salvo indicazione contraria, le merci sono di origine preferenziale … (65) .

Latvian version

To produktu eksportētājs, kuri ietverti šajā dokumentā (muitas vai kompetentu valsts iestāžu atlauja Nr. … (64) ), deklarē, ka, izņemot tur, kur ir citādi skaidri noteikts, šiem produktiem ir preferenciāla izcelsme … (65) .

Lithuanian version

Šiame dokumente išvardintų prekių eksportuotojas (muitinės arba kompetentingos viešosios valdžios institucijos liudijimo Nr. … (64) ) deklaruoja, kad, jeigu kitaip nenurodyta, tai yra … (65) preferencinės kilmės prekės.

Hungarian version

A jelen okmányban szereplő áruk exportőre (vámfelhatalmazási szám: … (64) vagy az illetékes kormányzati szerv által kiadott engedély száma: …) kijelentem, hogy eltérő jelzs hiányában az áruk kedvezményes … származásúak (65) .

Maltese version

L-esportatur tal-prodotti koperti b’dan id-dokument (awtorizzazzjoni kompetenti tal-gvern jew tad-dwana nru. … (64) ) jiddikjara li, hlief fejn indikat b’mod car li mhux hekk, dawn il-prodotti huma ta’ origini preferenzjali … (65) .

Dutch version

De exporteur van de goederen waarop dit document van toepassing is (douanevergunning of vergunning van de competente overheidsinstantie nr. … (64) ) verklaart dat, behoudens uitdrukkelijke andersluidende vermelding, deze goederen van preferentiële … oorsprong zijn (65) .

Polish version

Eksporter produktów objętych tym dokumentem (upoważnienie władz celnych lub upoważnienie właściwych władz nr … (64) ) deklaruje, że z wyjątkiem gdzie jest to wyraźnie określone, produkty te mają … (65) preferencyjne pochodzenie.

Portuguese version

O abaixo assinado, exportador dos produtos cobertos pelo presente documento (autorização aduaneira ou da autoridade governamental competente n° … (64) ) declara que, salvo expressamente indicado em contrário, estes produtos são de origem preferencial … (65) ˆ

Romanian version

Exportatorul produselor ce fac obiectul acestui document (autorizația vamală sau a autorității guvernamentale competente nr. … (64) ) declară că, exceptând cazul în care în mod expres este indicat altfel, aceste produse sunt de origine preferențială … (65) .

Slovak version

Vývozca výrobkov uvedených v tomto dokumente (číslo povolenia colnej správy alebo príslušného vládneho povolenia … (64) ) vyhlasuje, že okrem zreteľne označených, majú tieto výrobky preferenčný pôvod v … (65) .

Slovenian version

Izvoznik blaga, zajetega s tem dokumentom, (pooblastilo carinskih ali pristojnih državnih organov št. … (64) ) izjavlja, da, razen če ni drugače jasno navedeno, ima to blago preferencialno … (65) poreklo.

Finnish version

Tässä asiakirjassa mainittujen tuotteiden viejä (tullin tai toimivaltaisen julkisen viranomaisen lupa nro … ( 64 )) ilmoittaa, että nämä tuotteet ovat, ellei toisin ole selvästi merkitty, etuuskohteluun oikeutettuja … alkuperätuotteita ( 65 ).

Swedish version

Exportören av de varor som omfattas av detta dokument (tullmyndighetens tillstånd eller behörig statlig myndighet nr … (64) ) försäkrar att dessa varor, om inte annat tydligt markerats, har förmånsberättigande … ursprung (65) .

… ( 66 )

(Place and date)

… ( 67 )

(Signature of the exporter; in addition, the name of the person signing the declaration shall to be indicated in clear script)

▼B

Appendix 5

PERIOD OF TIME FOR THE PRESENTATION OF AN INVOICE DECLARATION OR REIMBURSEMENT OF TARIFFS IN ACCORDANCE WITH ARTICLES 19, PARAGRAPH 6 AND 21, PARAGRAPH 4 OF ANNEX II, CONCERNING THE DEFINITION OF THE CONCEPT OF "ORIGINATING PRODUCTS" AND METHODS OF ADMINISTRATIVE COOPERATION

1. For the EU Party, two years.

2. For the Republics of the CA Party, one year.

Appendix 6

AMOUNTS REFERRED TO IN ARTICLES 19, PARAGRAPH 1 (B) AND 24, PARAGRAPH 3 OF ANNEX II, CONCERNING THE DEFINITION OF THE CONCEPT OF "ORIGINATING PRODUCTS" AND METHODS OF ADMINISTRATIVE COOPERATION

CONDITIONS FOR MAKING OUT AN INVOICE DECLARATION

In accordance with Article 19, paragraph 1(b) of Annex II, an invoice declaration as referred to in Article 14, paragraph 1(b) of said Annex may be made out by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed 6 000 EUR.

EXEMPTIONS FROM PROOF OF ORIGIN

In accordance with Article 24, paragraph 3 of Annex II, the total value of the products indicated in said Article, shall not exceed 500 EUR in the case of small packages or 1 200 EUR in the case of products forming part of travellers' personal luggage.

JOINT DECLARATION OF COSTA RICA AND THE EUROPEAN UNION TO CHAPTER 1 OF TITLE II (TRADE IN GOODS) OF THIS AGREEMENT

Costa Rica shall review that the internal taxes charged on the beverages listed below are applied pursuant to the provisions of Chapter 1 of Title II (Trade in Goods), such that:

(a)

For carbonated beverages classified under tariff heading 2202 and alcoholic beverages classified under tariff heading 2203 , such revision shall be completed no later than one year after entry into force.

(b)

For alcoholic beverages classified under tariff headings 2204 to 2208 , such review shall be completed no later than four years after entry into force.

JOINT DECLARATION ON ARTICLE 88 OF CHAPTER 1 OF TITLE II (TRADE IN GOODS)

Costa Rica and Guatemala may continue to apply the measures listed below after the date of entry into force of this Agreement. The necessity of maintaining these measures will be examined by the Parties, at the latest, ten years after the date of entry into force of this Agreement.

Guatemala

(a)

Ley del Café, Decreto No. 19-69 del Congreso de la República de Guatemala, Decreto No. 114-63 del Jefe de Estado y Decreto Ley No. 111-85 del Jefe de Estado.

Costa Rica

(a)

Law No. 5515 of 19 April 1974 as amended by Law No. 5538 of 18 June 1974; Law No. 4895 of 16 November 1971 as amended by Law No. 7147 of 30 April 1990 and Law No. 7277 of 17 December 1991;

(b)

Law No. 2762 of 21 June 1961 as amended by Law No. 7551 of 22 September 1995; and

(c)

Law No. 6247 of 2 May 1978 and Law No. 7837 of 5 October 1998.

JOINT DECLARATION CONCERNING THE PRINCIPALITY OF ANDORRA

1. Products originating in the Principality of Andorra falling within Chapters 25 to 97 of the Harmonized System shall be accepted by the Republics of the CA Party as originating in the European Union within the meaning of this Agreement.

2. Annex II (Concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Co-operation) shall apply mutatis mutandis for the purpose of defining the originating status of the above mentioned products.

JOINT DECLARATION CONCERNING THE REPUBLIC OF SAN MARINO

1. Products originating in the Republic of San Marino shall be accepted by the Republics of the CA Party as originating in the European Union within the meaning of this Agreement.

JOINT DECLARATION CONCERNING DEROGATIONS

1. The Parties recognise the important role of a stable growth and progress of the economies of the Republics of the CA Party in encouraging the smooth development of trade relations between the Parties.

2. For that purpose, the Sub-Committee on Customs, Trade Facilitation and Rules of Origin, established in accordance with Article 123 of Chapter 3 (Customs and Trade Facilitation) of Title II of Part IV of this Agreement (hereinafter referred to as the "Sub-Committee"), shall discuss and consider derogation requests from Annex II where the development of existing industries or the creation of new industries in the Republics of the CA Party justify the adoption of such derogations. The derogations subsequently may be adopted by the Association Council.

3. The Republics of the CA Party shall, either before or when the request for derogation is submitted to the Sub-Committee, notify the EU Party of its request for a derogation together with the reasons for the request in accordance with paragraph 5.

4. Within the Association Council, the EU Party shall respond positively to the requests of the Republics of the CA Party, if admissible and duly justified in conformity with this Declaration and if they cannot cause serious injury to an established European Union's industry.

5. In order to facilitate the examination by the Sub-Committee of requests for derogation, one or more Republics of the CA Party shall furnish in support of their request the fullest possible information covering in particular the following:

(a)

description of the finished product;

(b)

nature and quantity of materials originating in third countries;

(c)

manufacturing processes;

(d)

added value achieved;

(e)

number of employees in the enterprise concerned;

(f)

anticipated volume of exports to the European Union;

(g)

other possible sources of supply for raw materials;

(h)

other observations.

6. The examination of requests for derogation shall in particular take into account:

(a)

cases where the application of the existing rules of origin would significantly affect the ability of an existing industry in one or more Republics of the CA Party making the request to continue their exports to the European Union, with particular reference to cases where this could lead to cessation of its activities;

(b)

specific cases where it can be clearly demonstrated that significant investment in an industry could be deterred by the rules of origin and where a derogation favouring the realisation of the investment program would enable these rules to be satisfied by stages.

7. In every case an examination shall be made to ascertain whether the rules relating to cumulation of origin do not provide a solution to the problem.

8. The Sub-Committee shall take steps necessary to ensure that a decision on a request for derogation is reached as soon as possible. The derogation may be granted for the period of twelve months. The Sub-Committee may review the necessity to extend the period of validation of the derogation by another twelve months upon the request of the Republics of the CA Party, if the economic conditions which formed the basis for establishing the derogation continue, taking into account other conditions referred to in paragraphs 1 to 7. The extension of the derogation shall be decided by the Association Council.

JOINT DECLARATION REGARDING THE REVISION OF THE RULES OF ORIGIN CONTAINED IN ANNEX II

(concerning the definition of the concept of "originating products" and methods of administrative co-operation)

1. The Parties agree to review the provisions contained in Annex II (Concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Co-operation) and discuss the necessary amendments upon request of either Party. In such discussions, the Parties shall take into account the development of technologies, production processes and all other factors, which might justify the changes to the rules. Any changes to that Annex shall be made on the basis of a mutual agreement.

2. Appendix 2 and 2A to Annex II will be adapted in accordance with the periodical changes to the Harmonized System.

JOINT DECLARATION CONCERNING THE REVISION OF THE RULES OF ORIGIN APPLICABLE TO PRODUCTS OF CHAPTERS 61 AND 62 OF THE HARMONIZED SYSTEM

If the rules of origin applied by the European Union for products of Chapters 61 and 62 of the Harmonized System, in the framework of the Generalised System of Preferences for non least-developed countries (LDCs), are more relaxed than the ones contained in this Agreement, after consultations in the Association Committee at the request of one or more Republics of the CA Party, the Association Council shall modify Appendix 2 of Annex II (Concerning the Definition of the Concept of "Originating Products" and Methods of Administrative Co-operation) in order to apply the same level of relaxation.

JOINT DECLARATION CONCERNING TEMPORAL USE OF ADDITIONAL NON-ORIGINATING MATERIALS FOR PRODUCTS OF CHAPTERS 61 AND 62 OF THE HARMONIZED SYSTEM

At the initiative of one or more Republics of the CA Party and after consultations in the Association Committee, the Association Council may decide to temporarily permit the use of additional non-originating materials which shall be identified at 8 digit level for products in Chapters 61 and 62 of the Harmonized System, provided that there is no production of these materials in the Parties. Under these circumstances, these materials shall be considered as originating for the effects of the rules of origin of Appendix 2 of Annex II (Concerning the Definition of the Concept of ‘Originating Products’ and Methods of Administrative Co-operation) applicable to products in Chapters 61 and 62 of the Harmonized System. After consultations in the Association Committee, the use of the above mentioned materials shall not be permitted when a Party demonstrates that there is production of these materials in the Parties.

Sdílet tuto stránku:

Rychlé odkazy

Časté dotazy

Shledali jste tuto stránku užitečnou?

Rychlé odkazy

Časté dotazy

Shledali jste tuto stránku užitečnou?

Mapa stránek